Specification	TLC5510INS

Architecture	Flash
Configuration	S/H-ADC
Data Interface	Parallel
Input Type	Single Ended
Mounting Type	Surface Mount
Number of A/D Converters	1
Number of Bits	8
Number of Inputs	1
Package / Case	24-SOIC
Package / Case [custom]	5.3 mm
Package / Case [custom]	0.209 in
Ratio - S/H:ADC	1:1
Reference Type	Internal
Supplier Device Package	24-SO
Voltage - Supply, Analog	5 V
Voltage - Supply, Digital	5 V

TLC5510A Series

8-bit, 20-MSPS analog-to-digital converter (ADC) with 4-Vpp input

Part	Configuration	Package / Case	Package / Case [custom]	Package / Case [custom]	Number of Inputs	Voltage - Supply, Analog	Reference Type	Input Type	Number of Bits	Architecture	Voltage - Supply, Digital	Number of A/D Converters	Mounting Type	Data Interface	Ratio - S/H:ADC	Supplier Device Package	Package / Case	Operating Temperature [Max]	Operating Temperature [Min]
Texas Instruments TLC5510INS	S/H-ADC	24-SOIC	5.3 mm	0.209 in	1	5 V	Internal	Single Ended	8	Flash	5 V	1	Surface Mount	Parallel	1:1	24-SO
Texas Instruments TLC5510IPWR	S/H-ADC	24-TSSOP			1	5 V	Internal	Single Ended	8	Flash	5 V	1	Surface Mount	Parallel	1:1	24-TSSOP	0.173 in 4.4 mm
Texas Instruments TLC5510IPW	S/H-ADC	24-TSSOP			1	5 V	Internal	Single Ended	8	Flash	5 V	1	Surface Mount	Parallel	1:1	24-TSSOP	0.173 in 4.4 mm	75 ░C	20 °C
Texas Instruments TLC5510INSR	S/H-ADC	24-SOIC	5.3 mm	0.209 in	1	5 V	Internal	Single Ended	8	Flash	5 V	1	Surface Mount	Parallel	1:1	24-SO		75 ░C	20 °C
Texas Instruments TLC5510AINS	S/H-ADC	24-SOIC	5.3 mm	0.209 in	1	5 V	Internal	Single Ended	8	Flash	5 V	1	Surface Mount	Parallel	1:1	24-SO		75 ░C	20 °C
Texas Instruments TLC5510AINSR	S/H-ADC	24-SOIC	5.3 mm	0.209 in	1	5 V	Internal	Single Ended	8	Flash	5 V	1	Surface Mount	Parallel	1:1	24-SO		75 ░C	20 °C

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 9.59
		10	$ 8.66
		34	$ 8.26
		102	$ 7.17
		272	$ 6.85
		510	$ 6.24
		1020	$ 5.44
Texas Instruments	TUBE	1	$ 8.52
		100	$ 6.94
		250	$ 5.46
		1000	$ 4.63

Description

General part information

TLC5510A Series

The TLC5510 and TLC5510A are CMOS, 8-bit, 20 MSPS analog-to-digital converters (ADCs) that utilize a semiflash architecture. The TLC5510 and TLC5510A operate with a single 5-V supply and typically consume only 130 mW of power. Included is an internal sample-and-hold circuit, parallel outputs with high-impedance mode, and internal reference resistors.

The semiflash architecture reduces power consumption and die size compared to flash converters. By implementing the conversion in a 2-step process, the number of comparators is significantly reduced. The latency of the data output valid is 2.5 clocks.

The TLC5510 uses the three internal reference resistors to create a standard, 2-V, full-scale conversion range using VDDA. Only external jumpers are required to implement this option and eliminates the need for external reference resistors. The TLC5510A uses only the center internal resistor section with an externally applied 4-V reference such that a 4-V input signal can be used. Differential linearity is 0.5 LSB at 25°C and a maximum of 0.75 LSB over the full operating temperature range. Typical dynamic specifications include a differential gain of 1% and differential phase of 0.7 degrees.

Documents

Technical documentation and resources

8-Bit High-Speed Analog-to-Digital Converters datasheet (Rev. L)

Data sheet