Specification	SN65HVD3086EDGSR

Data Rate	20 Mbps
Duplex	Full
Mounting Type	Surface Mount
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	10-MSOP, 10-TFSOP
Package / Case [x]	3 mm
Package / Case [x]	0.118 in
Protocol	RS422, RS485
Receiver Hysteresis	30 mV
Supplier Device Package	10-VSSOP
Type	Transceiver
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V

SN65HVD3086E Series

Low-Power RS-485 Full-Duplex Drivers/Receivers

Part	Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Supplier Device Package	Receiver Hysteresis	Operating Temperature [Max]	Operating Temperature [Min]	Mounting Type	Protocol	Package / Case	Package / Case [x]	Package / Case [x]	Data Rate	Duplex	Package / Case [x]	Package / Case [y]
Texas Instruments SN65HVD3086EDGS	Transceiver	4.5 V	5.5 V	10-VSSOP	30 mV	85 °C	-40 °C	Surface Mount	RS422 RS485	10-MSOP 10-TFSOP	3 mm	0.118 in	20 Mbps	Full
Texas Instruments SN65HVD3086EDGSR	Transceiver	4.5 V	5.5 V	10-VSSOP	30 mV	85 °C	-40 °C	Surface Mount	RS422 RS485	10-MSOP 10-TFSOP	3 mm	0.118 in	20 Mbps	Full
Texas Instruments SN65HVD3086EDR	Transceiver	4.5 V	5.5 V		30 mV	85 °C	-40 °C	Surface Mount	RS422 RS485	14-SOIC			20 Mbps	Full	0.154 in	3.9 mm
Texas Instruments SN65HVD3086ED	Transceiver	4.5 V	5.5 V		30 mV	85 °C	-40 °C	Surface Mount	RS422 RS485	14-SOIC			20 Mbps	Full	0.154 in	3.9 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.78
		10	$ 2.49
		25	$ 2.36
		100	$ 2.04
		250	$ 1.94
		500	$ 1.74
		1000	$ 1.47
	Digi-Reel®	1	$ 2.78
		10	$ 2.49
		25	$ 2.36
		100	$ 2.04
		250	$ 1.94
		500	$ 1.74
		1000	$ 1.47
	Tape & Reel (TR)	2500	$ 1.39
		5000	$ 1.34
Texas Instruments	LARGE T&R	1	$ 1.53
		100	$ 1.26
		250	$ 0.91
		1000	$ 0.68

Description

General part information

SN65HVD3086E Series

Each of these devices is a balanced driver and receiver designed for full-duplex RS-485 or RS-422 data bus networks. Powered by a 5-V supply, they are fully compliant with the TIA/EIA-485A standard.

With controlled bus output transition times, the devices are suitable for signaling rates from 200 kbps to 20 Mbps.

The devices are designed to operate with a low supply current, less than 1 mA (typical), exclusive of the load. When in the inactive shutdown mode, the supply current drops to a few nanoamps, making these devices ideal for power-sensitive applications.

Documents

Technical documentation and resources

SN65HVD308xE Low-Power RS-485 Full-Duplex Drivers and Receivers datasheet (Rev. F)

Data sheet