DRV8932PPWPR
Active35-V, 1-A, QUAD INDEPENDENT HALF BRIDGE DRIVER WITH CURRENT SENSE
Deep-Dive with AI
Search across all available documentation for this part.
DRV8932PPWPR
Active35-V, 1-A, QUAD INDEPENDENT HALF BRIDGE DRIVER WITH CURRENT SENSE
Technical Specifications
Parameters and characteristics for this part
| Specification | DRV8932PPWPR |
|---|---|
| Applications | Stepper Motors, Solenoids, General Purpose, DC Motors |
| Current - Output / Channel | 1.5 A |
| Current - Peak Output | 1.5 A |
| Fault Protection | Over Current, Over Temperature, Current Limiting, Short Circuit, UVLO |
| Features | Charge Pump |
| Interface | Logic, Analog, PWM |
| Load Type | Capacitive, Inductive, Resistive |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Half Bridge (4) |
| Package / Case | 28-PowerTSSOP |
| Package / Case [custom] | 4.4 mm |
| Package / Case [custom] | 0.173 " |
| Rds On (Typ) | 550 mOhm, 550 mOhm |
| Supplier Device Package | 28-HTSSOP |
| Technology | Power MOSFET |
| Voltage - Load [Max] | 33 V |
| Voltage - Load [Min] | 4.5 V |
| Voltage - Supply [Max] | 33 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.98 | |
| 10 | $ 3.58 | |||
| 25 | $ 3.38 | |||
| 100 | $ 2.93 | |||
| 250 | $ 2.78 | |||
| 500 | $ 2.49 | |||
| 1000 | $ 2.10 | |||
| Digi-Reel® | 1 | $ 3.98 | ||
| 10 | $ 3.58 | |||
| 25 | $ 3.38 | |||
| 100 | $ 2.93 | |||
| 250 | $ 2.78 | |||
| 500 | $ 2.49 | |||
| 1000 | $ 2.10 | |||
| Tape & Reel (TR) | 2500 | $ 1.74 | ||
| Texas Instruments | LARGE T&R | 1 | $ 2.82 | |
| 100 | $ 2.47 | |||
| 250 | $ 1.73 | |||
| 1000 | $ 1.39 | |||
Description
General part information
DRV8932 Series
The DRV8932 provides four half-bridge drivers for industrial applications. The device can be used for driving up to four solenoid loads, two DC motors, one Stepper motor, or other loads.
The output stage for each channel consists of N-channel power MOSFETs configured in a half bridge. A simple PWM interface allows easy interface with the controller. The DRV8932 operates off a single power supply and supports a wide input supply range from 4.5 V to 33 V. The DRV8932 can supply up to 1.5-A peak or 1.05-A RMS output current per channel (dependent on PCB design).
A low-power sleep mode is provided to achieve a low quiescent current draw by shutting down much of the internal circuitry. Internal protection functions are provided for undervoltage-lockout, overcurrent protection on each FET, short circuit protection, and overtemperature. Fault conditions are indicated by the nFAULT pin.
Documents
Technical documentation and resources
