Specification	SN75160BDW

Duplex	Half
Mounting Type	Surface Mount
Number of Drivers/Receivers [custom]	8
Number of Drivers/Receivers [custom]	8
Operating Temperature [Max]	70 °C
Operating Temperature [Min]	0 °C
Package / Case	20-SOIC
Package / Case [y]	0.295 in
Package / Case [y]	7.5 mm
Protocol	IEEE 488
Receiver Hysteresis	650 mV
Supplier Device Package	20-SOIC
Type	Transceiver
Voltage - Supply [Max]	5.25 V
Voltage - Supply [Min]	4.75 V

SN75160B Series

Octal General-Purpose Interface Bus Transceiver

Part	Package / Case	Package / Case	Package / Case	Duplex	Supplier Device Package	Receiver Hysteresis	Protocol	Type	Operating Temperature [Max]	Voltage - Supply [Min]	Voltage - Supply [Max]	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Mounting Type	Package / Case [y]	Package / Case [y]
Texas Instruments SN75160BN	20-DIP	7.62 mm	0.3 in	Half	20-PDIP	650 mV	IEEE 488	Transceiver	70 °C	4.75 V	5.25 V	8	8	Through Hole
Texas Instruments SN75160BDWRG4	20-SOIC			Half	20-SOIC	650 mV	IEEE 488	Transceiver	70 °C	4.75 V	5.25 V	8	8	Surface Mount	0.295 in	7.5 mm
Texas Instruments SN75160BDWE4	20-SOIC			Half	20-SOIC	650 mV	IEEE 488	Transceiver	70 °C	4.75 V	5.25 V	8	8	Surface Mount	0.295 in	7.5 mm
Texas Instruments SN75160BDWG4	20-SOIC			Half	20-SOIC	650 mV	IEEE 488	Transceiver	70 °C	4.75 V	5.25 V	8	8	Surface Mount	0.295 in	7.5 mm
Texas Instruments SN75160BDWR	20-SOIC			Half	20-SOIC	650 mV	IEEE 488	Transceiver	70 °C	4.75 V	5.25 V	8	8	Surface Mount	0.295 in	7.5 mm
Texas Instruments SN75160BDWRE4	20-SOIC			Half	20-SOIC	650 mV	IEEE 488	Transceiver	70 °C	4.75 V	5.25 V	8	8	Surface Mount	0.295 in	7.5 mm
Texas Instruments SN75160BNG4	20-DIP	7.62 mm	0.3 in	Half	20-PDIP	650 mV	IEEE 488	Transceiver	70 °C	4.75 V	5.25 V	8	8	Through Hole
Texas Instruments SN75160BDW	20-SOIC			Half	20-SOIC	650 mV	IEEE 488	Transceiver	70 °C	4.75 V	5.25 V	8	8	Surface Mount	0.295 in	7.5 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 4.45
		10	$ 2.95
		25	$ 2.56
		100	$ 2.12
Texas Instruments	TUBE	1	$ 2.68
		100	$ 2.35
		250	$ 1.65
		1000	$ 1.33

Description

General part information

SN75160B Series

The SN75160B 8-channel general-purpose interface bus (GPIB) transceiver is a monolithic, high-speed, low-power Schottky device designed for two-way data communications over single-ended transmission lines. It is designed to meet the requirements of IEEE Standard 488-1978. The transceiver features driver outputs that can be operated in either the passive-pullup or 3-state mode. If talk enable (TE) is high, these ports have the characteristics of passive-pullup outputs when pullup enable (PE) is low and of 3-state outputs when PE is high. Taking TE low places these ports in the high-impedance state. The driver outputs are designed to handle loads up to 48 mA of sink current.

Output glitches during power up and power down are eliminated by an internal circuit that disables both the bus and receiver outputs. The outputs do not load the bus when VCC= 0. When combined with the SN75161B or SN75162B management bus transceivers, the pair provides the complete 16-wire interface for the IEEE-488 bus.

The SN75160B is characterized for operation from 0°C to 70°C.

Documents

Technical documentation and resources

Octal General-Purpose Interface Bus Transceiver datasheet (Rev. B)

Data sheet