CABT16245AMDLREP
ActiveENHANCED PRODUCT 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
CABT16245AMDLREP
ActiveENHANCED PRODUCT 16-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
Technical Specifications
Parameters and characteristics for this part
| Specification | CABT16245AMDLREP |
|---|---|
| Current - Output High, Low [custom] | 24 mA |
| Current - Output High, Low [custom] | 48 mA |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 8 |
| Number of Elements | 2 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -55 °C |
| Output Type | 3-State |
| Package / Case | 48-BSSOP |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Supplier Device Package | 48-SSOP |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 4.46 | |
| 10 | $ 4.00 | |||
| 25 | $ 3.78 | |||
| 100 | $ 3.28 | |||
| 250 | $ 3.11 | |||
| 500 | $ 2.79 | |||
| Tape & Reel (TR) | 1000 | $ 2.35 | ||
| 2000 | $ 2.24 | |||
| Texas Instruments | LARGE T&R | 1 | $ 3.06 | |
| 100 | $ 2.50 | |||
| 250 | $ 1.96 | |||
| 1000 | $ 1.67 | |||
Description
General part information
SN74ABT16245A-EP Series
The SN74ABT16245A-EP is a 16-bit noninverting 3-state transceiver designed for synchronous two-way communication between data buses. The control-function implementation minimizes external timingrequirements.
This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
When VCCis between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impendance state above 2.1 V,OEshould be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Documents
Technical documentation and resources