Specification	INA253A3IPW

-3db Bandwidth	350 kHz
Amplifier Type	Current Sense
Current - Input Bias	90 pA
Current - Supply	1.8 mA
Mounting Type	Surface Mount
Number of Circuits	1
Operating Temperature [Max]	125 °C
Operating Temperature [Min]	-40 °C
Package / Case	20-TSSOP
Package / Case [x]	0.173 in
Package / Case [y]	4.4 mm
Slew Rate	2.4 V/µs
Supplier Device Package	20-TSSOP
Voltage - Supply Span (Max) [Max]	5.5 V
Voltage - Supply Span (Min) [Min]	2.7 V

INA253-Q1 Series

AEC-Q100, 80V, bi-directional, precision current sense amp w/pwm rejection & int. shunt resistor

Part	Voltage - Supply Span (Max) [Max]	Operating Temperature [Min]	Operating Temperature [Max]	Number of Circuits	Voltage - Supply Span (Min) [Min]	Amplifier Type	Package / Case [y]	Package / Case	Package / Case [x]	Current - Supply	-3db Bandwidth	Slew Rate	Mounting Type	Current - Input Bias	Supplier Device Package	Board Type	Current - Supply (Main IC)	Channels per IC	Utilized IC / Part	Supplied Contents	Output Type	Voltage - Supply, Single/Dual (±) [Min]	Voltage - Supply, Single/Dual (±) [Max]	Grade	Qualification
Texas Instruments INA253A2IPW	5.5 V	-40 °C	125 °C	1	2.7 V	Current Sense	4.4 mm	20-TSSOP	0.173 in	1.8 mA	350 kHz	2.4 V/µs	Surface Mount	90 pA	20-TSSOP
Texas Instruments INA253EVM						Current Sense					350 kHz	2 V/µs				Fully Populated	1.8 mA	1 - Single	INA253	Board(s)	Single-Ended	2.7 V	5.4 V
Texas Instruments INA253A2QPWRQ1	5.5 V	-40 °C	125 °C	1	2.7 V	Current Sense	4.4 mm	20-TSSOP	0.173 in	1.8 mA	350 kHz	2.4 V/µs	Surface Mount	90 µA	20-TSSOP									Automotive	AEC-Q100
Texas Instruments INA253A2IPWR	5.5 V	-40 °C	125 °C	1	2.7 V	Current Sense	4.4 mm	20-TSSOP	0.173 in	1.8 mA	350 kHz	2.4 V/µs	Surface Mount	90 µA	20-TSSOP
Texas Instruments INA253A3IPW	5.5 V	-40 °C	125 °C	1	2.7 V	Current Sense	4.4 mm	20-TSSOP	0.173 in	1.8 mA	350 kHz	2.4 V/µs	Surface Mount	90 pA	20-TSSOP
Texas Instruments INA253A3QPWRQ1	5.5 V	-40 °C	125 °C	1	2.7 V	Current Sense	4.4 mm	20-TSSOP	0.173 in	1.8 mA	350 kHz	2.4 V/µs	Surface Mount	90 µA	20-TSSOP									Automotive	AEC-Q100

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 6.31
		10	$ 4.26
		25	$ 3.73
		100	$ 3.14
		250	$ 2.85
		500	$ 2.67
Texas Instruments	TUBE	1	$ 3.79
		100	$ 3.32
		250	$ 2.33
		1000	$ 1.88

Description

General part information

INA253-Q1 Series

The INA253-Q1 is an automotive, voltage-output, current sense amplifier with an integrated shunt resistor of 2 mΩ. The INA253-Q1 monitors bidirectional currents over a wide common-mode range from –4 V to +80 V, independent of the supply voltage. Three fixed gains are available: 100 mV/A, 200 mV/A, and 400 mV/A. The integration of the precision resistor with a zero-drift chopped amplifier provides calibration-equivalent measurement accuracy, ultra-low temperature-drift performance of 15 ppm/ °C, and an optimized Kelvin layout for the sensing resistor.

The INA253-Q1 is designed with enhanced PWM rejection circuitry to suppress large (dv/dt) signals that enable real-time continuous current measurements. The measurements are critical for in-line current measurements in a motor-drive application, and for solenoid valve-control applications.

This device operates from a single 2.7-V to 5.5-V power supply, drawing a maximum of 3 mA of supply current. All gain versions are specified over the operating temperature range of –40 °C to +125 °C, and are available in a 20-pin TSSOP package.

Documents

Technical documentation and resources

Low-Drift, Precision, In-Line Motor Current Measurements With PWM Rejection (Rev. D)

Application brief

High-Side Drive, High-Side Solenoid Monitor With PWM Rejection (Rev. D)

Application brief

Current Sensing in Collaborative and Industrial Robotic Arms (Rev. B)

Application brief

Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers

Application note

INA253 High Voltage, Bidirectional, Zero-Drift, Current-Shunt Monitor With Integrated, 2-mΩ, Precision, Low Inductive Shunt Resistor datasheet (Rev. A)

Data sheet

INA253A3IPW

Deep-Dive with AI

INA253A3IPW

Deep-Dive with AI

Technical Specifications

INA253-Q1 Series

Pricing

Description

INA253-Q1 Series

Documents

INA253EVM User's Guide

Current Mode Control in Switching Power Supplies (Rev. E)

An Engineer's Guide to Current Sensing (Rev. B)

Current Sense Amplifiers (Rev. E)

Current Sensing in an H-Bridge (Rev. D)

Current-sensing dynamics in automotive solenoids

4 key current-sensing design trends that are powering electrification

Low Temperature Drift Integrated Shunt vs Active Temp Compensation of Shunt

Integrating the Current Sensing Resistor (Rev. D)

Switching Power Supply Current Measurements (Rev. E)

Low-Drift, Precision, In-Line Motor Current Measurements With PWM Rejection (Rev. D)

High-Side Drive, High-Side Solenoid Monitor With PWM Rejection (Rev. D)

Current Sensing in Collaborative and Industrial Robotic Arms (Rev. B)

Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers

INA253 High Voltage, Bidirectional, Zero-Drift, Current-Shunt Monitor With Integrated, 2-mΩ, Precision, Low Inductive Shunt Resistor datasheet (Rev. A)

INA253-Q1 Series