
SN74LVTH162245DL
Active3.3-V ABT 16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.

SN74LVTH162245DL
Active3.3-V ABT 16-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74LVTH162245DL |
|---|---|
| Current - Output High, Low [custom] | 64 mA, 12 mA |
| Current - Output High, Low [custom] | 32 mA, 12 mA |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 8 |
| Number of Elements | 2 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 48-BSSOP |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Supplier Device Package | 48-SSOP |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 1.86 | |
| 10 | $ 1.67 | |||
| 25 | $ 1.57 | |||
| 100 | $ 1.34 | |||
| 250 | $ 1.26 | |||
| 500 | $ 1.10 | |||
| 1000 | $ 0.91 | |||
| 2500 | $ 0.85 | |||
| 5000 | $ 0.82 | |||
| Texas Instruments | TUBE | 1 | $ 1.54 | |
| 100 | $ 1.18 | |||
| 250 | $ 0.87 | |||
| 1000 | $ 0.62 | |||
Description
General part information
SN74LVTH162245 Series
The 'LVTH162245 devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for low-voltage (3.3-V) VCCoperation, but with the capability to provide a TTL interface to a 5-V system environment.
These devices can be used as two 8-bit transceivers or one 16-bit transceiver. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess ICCand ICCZ.
Documents
Technical documentation and resources