TPS12100QDGXRQ1
ActiveAUTOMOTIVE, 45V LOW-IQ DUAL HIGH-SIDE DRIVER WITH SHORT CIRCUIT PROTECTION AND DIAGNOSTICS
Deep-Dive with AI
Search across all available documentation for this part.
TPS12100QDGXRQ1
ActiveAUTOMOTIVE, 45V LOW-IQ DUAL HIGH-SIDE DRIVER WITH SHORT CIRCUIT PROTECTION AND DIAGNOSTICS
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS12100QDGXRQ1 |
|---|---|
| Channel Type | Synchronous |
| Current - Peak Output (Source, Sink) [custom] | 2 A |
| Current - Peak Output (Source, Sink) [custom] | 2 A |
| Driven Configuration | High-Side |
| Gate Type | MOSFET (N-Channel) |
| Grade | Automotive |
| Input Type | Non-Inverting |
| Mounting Type | Surface Mount |
| Number of Drivers | 2 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 19 Leads, 3 mm Width, 0.118 in |
| Package / Case | 20-TFSOP |
| Qualification | AEC-Q100 |
| Supplier Device Package | 19-VSSOP |
| Voltage - Supply [Max] | 40 VDC |
| Voltage - Supply [Min] | 3.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | N/A | 4098 | $ 3.68 | |
| Texas Instruments | LARGE T&R | 1 | $ 2.56 | |
| 100 | $ 2.24 | |||
| 250 | $ 1.57 | |||
| 1000 | $ 1.26 | |||
Description
General part information
TPS1210-Q1 Series
The TPS1210x-Q1 family is a 45V, low IQ, smart high side driver with protection and diagnostics. With wide operating voltage range of 3.5V–40V, the device is designed for 12V system designs. The device can withstand and protect the loads from negative supply voltages down to –40V.
The device has two strong (2A) GATE drivers with separate control inputs (INP1, INP2) to drive back-to-back MOSFETs in common source configuration. TPS12100-Q1 has active high control inputs and TPS12101-Q1 has active low control inputs.
The device provides adjustable short-circuit protection. Auto-retry and latch-off fault behavior can be configured. Current sensing can be done either by an external sense resistor or by MOSFET VDS sensing. High side or low side current sense resistor configuration is possible by using CS_SEL pin input. The device also features diagnosis of the internal short circuit comparator using external control on SCP_TEST input.
Documents
Technical documentation and resources