Specification	SN74ABT16827DLR

Current - Output High, Low [custom]	64 mA
Current - Output High, Low [custom]	32 mA
Logic Type	Buffer, Non-Inverting
Mounting Type	Surface Mount
Number of Bits per Element	10
Number of Elements	2
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	3-State
Package / Case	0.295 in
Package / Case	56-BSSOP
Package / Case	7.5 mm
Supplier Device Package	56-SSOP
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V

SN74ABT16827 Series

20-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

Part	Logic Type	Package / Case	Package / Case	Package / Case	Number of Elements	Operating Temperature [Max]	Operating Temperature [Min]	Mounting Type	Output Type	Supplier Device Package	Number of Bits per Element	Voltage - Supply [Min]	Voltage - Supply [Max]	Current - Output High, Low [custom]	Current - Output High, Low [custom]
Texas Instruments SN74ABT16827DGGR
Texas Instruments SN74ABT16827DLR	Buffer Non-Inverting	0.295 in	56-BSSOP	7.5 mm	2	85 °C	-40 °C	Surface Mount	3-State	56-SSOP	10	4.5 V	5.5 V	64 mA	32 mA
Texas Instruments SN74ABT16827DLG4	Buffer Non-Inverting	0.295 in	56-BSSOP	7.5 mm	2	85 °C	-40 °C	Surface Mount	3-State	56-SSOP	10	4.5 V	5.5 V	64 mA	32 mA
Texas Instruments SN74ABT16827DL	Buffer Non-Inverting	0.295 in	56-BSSOP	7.5 mm	2	85 °C	-40 °C	Surface Mount	3-State	56-SSOP	10	4.5 V	5.5 V	64 mA	32 mA

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 3.20
	Digi-Reel®	1	$ 3.20
	Tape & Reel (TR)	1000	$ 1.69
		2000	$ 1.61
		5000	$ 1.55
Texas Instruments	LARGE T&R	1	$ 2.42
		100	$ 2.12
		250	$ 1.48
		1000	$ 1.20

Description

General part information

SN74ABT16827 Series

The 'ABT16827 are noninverting 20-bit buffers composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 10-bit buffer section are in the high-impedance state.

When VCCis between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54ABT16827 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16827 is characterized for operation from -40°C to 85°C.

Documents

Technical documentation and resources

SN74ABT16827DLR

Deep-Dive with AI

SN74ABT16827DLR

Deep-Dive with AI

Technical Specifications

SN74ABT16827 Series

Pricing

Description

SN74ABT16827 Series

Documents

Quad Flatpack No-Lead Logic Packages (Rev. D)

Understanding Advanced Bus-Interface Products Design Guide

Advanced BiCMOS Technology (ABT) Logic Characterization Information (Rev. B)

Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)

Family of Curves Demonstrating Output Skews for Advanced BiCMOS Devices (Rev. A)

Live Insertion

Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices

Implications of Slow or Floating CMOS Inputs (Rev. E)

TI IBIS File Creation, Validation, and Distribution Processes

Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)

20-Bit Buffers/Drivers With 3-State Outputs datasheet (Rev. C)

Semiconductor Packing Material Electrostatic Discharge (ESD) Protection

Advanced BiCMOS Technology (ABT) Logic Enables Optimal System Design (Rev. A)

Advanced Bus Interface Logic Selection Guide

Input and Output Characteristics of Digital Integrated Circuits

LOGIC Pocket Data Book (Rev. B)

Selecting the Right Level Translation Solution (Rev. A)

Logic Guide (Rev. AB)

Designing With Logic (Rev. C)

SN74ABT16827 Series