Specification	LPC662IM/NOPB

Amplifier Type	CMOS
Current - Input Bias	0.002 pA
Current - Output / Channel [custom]	40 mA
Current - Supply	86 µA
Gain Bandwidth Product	350 kHz
Mounting Type	Surface Mount
Number of Circuits	2
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	Push-Pull, Rail-to-Rail
Package / Case	8-SOIC
Package / Case [x]	0.154 in
Package / Case [y]	3.9 mm
Slew Rate	0.11 V/µs
Supplier Device Package	8-SOIC
Voltage - Input Offset	1 mV
Voltage - Supply Span (Max) [Max]	15.5 V
Voltage - Supply Span (Min) [Min]	4.75 V

LPC662 Series

Part	Supplier Device Package	Current - Supply	Amplifier Type	Voltage - Input Offset	Mounting Type	Number of Circuits	Output Type	Current - Input Bias	Voltage - Supply Span (Min) [Min]	Gain Bandwidth Product	Package / Case	Package / Case [y]	Package / Case [x]	Current - Output / Channel [custom]	Voltage - Supply Span (Max) [Max]	Operating Temperature [Min]	Operating Temperature [Max]	Slew Rate
Texas Instruments LPC662AIMX	8-SOIC	86 µA	CMOS	1 mV	Surface Mount	2	Push-Pull Rail-to-Rail	0.002 pA	4.75 V	350 kHz	8-SOIC	3.9 mm	0.154 in	40 mA	15.5 V	-40 °C	85 °C	0.11 V/µs
Texas Instruments LPC662IM/NOPB	8-SOIC	86 µA	CMOS	1 mV	Surface Mount	2	Push-Pull Rail-to-Rail	0.002 pA	4.75 V	350 kHz	8-SOIC	3.9 mm	0.154 in	40 mA	15.5 V	-40 °C	85 °C	0.11 V/µs
Texas Instruments LPC662AIM/NOPB	8-SOIC	86 µA	CMOS	1 mV	Surface Mount	2	Push-Pull Rail-to-Rail	0.002 pA	4.75 V	350 kHz	8-SOIC	3.9 mm	0.154 in	40 mA	15.5 V	-40 °C	85 °C	0.11 V/µs
Texas Instruments LPC662AIMX/NOPB	8-SOIC	86 µA	CMOS	1 mV	Surface Mount	2	Push-Pull Rail-to-Rail	0.002 pA	4.75 V	350 kHz	8-SOIC	3.9 mm	0.154 in	40 mA	15.5 V	-40 °C	85 °C	0.11 V/µs
Texas Instruments LPC662IMX	8-SOIC	86 µA	CMOS	1 mV	Surface Mount	2	Push-Pull Rail-to-Rail	0.002 pA	4.75 V	350 kHz	8-SOIC	3.9 mm	0.154 in	40 mA	15.5 V	-40 °C	85 °C	0.11 V/µs

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 4.23
		10	$ 3.21
Texas Instruments	TUBE	1	$ 3.43
		100	$ 3.01
		250	$ 2.11
		1000	$ 1.70

Description

General part information

LPC662 Series

The LPC662 CMOS Dual operational amplifier is ideal for operation from a single supply. It features a wide range of operating voltage from +5V to +15V, rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain (into 100 kand 5 k) are all equal to or better than widely accepted bipolar equivalents, while the power supply requirement is typically less than 0.5 mW.

This chip is built with National's advanced Double-Poly Silicon-Gate CMOS process.

See the LPC660 datasheet for a Quad CMOS operational amplifier and LPC661 for a single CMOS operational amplifier with these same features.

Documents

Technical documentation and resources

LPC662 Low Power CMOS Dual Operational Amplifier datasheet (Rev. B)

Data sheet