BQ7720701DSSR
Active3-SERIES TO 7-SERIES CELL LI-ION BATTERY, INTERNAL DELAY TIMER, VOLTAGE AND TEMPERATURE PROTECTOR
Deep-Dive with AI
Search across all available documentation for this part.
BQ7720701DSSR
Active3-SERIES TO 7-SERIES CELL LI-ION BATTERY, INTERNAL DELAY TIMER, VOLTAGE AND TEMPERATURE PROTECTOR
Technical Specifications
Parameters and characteristics for this part
| Specification | BQ7720701DSSR |
|---|---|
| Battery Chemistry | Lithium Ion |
| Fault Protection | Over Temperature, Over/Under Voltage |
| Function | Battery Protection |
| Mounting Type | Surface Mount |
| Number of Cells [Max] [custom] | 7 |
| Number of Cells [Min] [custom] | 3 |
| Operating Temperature [Max] | 110 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 12-WFDFN Exposed Pad |
| Supplier Device Package | 12-WSON (3x2) |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.70 | |
| 10 | $ 1.74 | |||
| 25 | $ 1.49 | |||
| 100 | $ 1.21 | |||
| 250 | $ 1.07 | |||
| 500 | $ 0.99 | |||
| 1000 | $ 0.92 | |||
| Digi-Reel® | 1 | $ 2.70 | ||
| 10 | $ 1.74 | |||
| 25 | $ 1.49 | |||
| 100 | $ 1.21 | |||
| 250 | $ 1.07 | |||
| 500 | $ 0.99 | |||
| 1000 | $ 0.92 | |||
| Tape & Reel (TR) | 3000 | $ 0.75 | ||
| Texas Instruments | LARGE T&R | 1 | $ 1.34 | |
| 100 | $ 1.11 | |||
| 250 | $ 0.80 | |||
| 1000 | $ 0.60 | |||
Description
General part information
BQ7720700 Series
The BQ77207 family of products provides a range of voltage and temperature monitoring including overvoltage (OVP), undervoltage (UVP), open wire (OW), and overtemperature (OT) protection for Li-ion battery pack systems. Each cell is monitored independently for overvoltage, undervoltage, and open-wire conditions. With the addition of an external NTC or PTC thermistor, the device can detect overtemperature conditions.
In the BQ77207 device, an internal delay timer is initiated upon detection of an overvoltage, undervoltage, open-wire, or overtemperature condition. Upon expiration of the delay timer, the respective output is triggered into its active state (either high or low, depending on the configuration).
The overvoltage triggers the COUT pin if a fault is detected, and undervoltage triggers the DOUT pin if a fault is detected. If an overtemperature or open-wire fault is detected, then both the DOUT and COUT will be triggered. For quicker production-line testing, the BQ77207 device provides a Customer Test Mode (CTM) with greatly reduced delay time.
Documents
Technical documentation and resources
