Specification	THS7002CPWP

-3db Bandwidth	100 MHz
Amplifier Type	Programmable Gain
Current - Input Bias	2.5 µA
Current - Output / Channel	95 mA
Current - Supply	5 mA
Mounting Type	Surface Mount
Number of Circuits	2
Operating Temperature [Max]	70 °C
Operating Temperature [Min]	0 °C
Package / Case	28-PowerTSSOP
Package / Case [custom]	4.4 mm
Package / Case [custom]	0.173 "
Slew Rate	175 V/µs
Supplier Device Package	28-HTSSOP
Voltage - Input Offset	1 mV
Voltage - Supply Span (Max) [Max]	32 V

THS7002 Series

70-MHz High-Speed Programmable-Gain Amplifier, Dual

Part	Current - Input Bias	Operating Temperature [Max]	Operating Temperature [Min]	Current - Output / Channel	Supplier Device Package	Slew Rate	Number of Circuits	Current - Supply	Amplifier Type	Package / Case [custom]	Package / Case	Package / Case [custom]	-3db Bandwidth	Voltage - Supply Span (Max) [Max]	Voltage - Input Offset	Mounting Type	Current - Supply (Main IC)	Supplied Contents	Channels per IC	Utilized IC / Part	Voltage - Supply, Single/Dual (±) [Max]	Voltage - Supply, Single/Dual (±) [Min]	Board Type	Output Type
Texas Instruments THS7002CPWP	2.5 µA	70 °C	0 °C	95 mA	28-HTSSOP	175 V/µs	2	5 mA	Programmable Gain	4.4 mm	28-PowerTSSOP	0.173 "	100 MHz	32 V	1 mV	Surface Mount
Texas Instruments THS7002EVM				95 mA		85 V/µs			Programmable Gain				100 MHz				7 mA	Board(s)	2 - Dual	THS7002	16 V 32 V	-4.5 V 9 V	Fully Populated	Single-Ended
Texas Instruments THS7002IPWP	2.5 µA	85 °C	-40 °C	95 mA	28-HTSSOP	85 V/µs	2	5 mA	Programmable Gain	4.4 mm	28-PowerTSSOP	0.173 "	100 MHz	32 V	1 mV	Surface Mount

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 14.26
		10	$ 10.14
		25	$ 9.08
		100	$ 7.89
		250	$ 7.32
		500	$ 6.97
		1000	$ 6.80
Texas Instruments	TUBE	1	$ 10.40
		100	$ 9.08
		250	$ 7.00
		1000	$ 6.26

Description

General part information

THS7002 Series

The THS7001 (single) and THS7002 (dual) are high-speed programmable-gain amplifiers, ideal for applications where load impedance can often vary. Each channel on this device consists of a separate low-noise input preamp and a programmable gain amplifier (PGA). The preamp is a voltage-feedback amplifier offering a low 1.7-nV/Hzvoltage noise with a 100-MHz (-3 dB) bandwidth. The output pin of the preamp is accessible so that filters can be easily added to the amplifier.

The 3-bit digitally-controlled PGA provides a -22-dB to 20-dB attenuation/gain range with a 6-dB step resolution. In addition, the PGA provides both high and low output clamp protection to prevent the output signal from swinging outside the common-mode input range of an analog-to-digital converter. The PGA provides a wide 70-MHz (-3 dB) bandwidth, which remains relatively constant over the entire gain/attenuation range. Independent shutdown control is also provided for power conservation and multiplexing. These devices operate over a wide ±4.5-V to ±16-V supply voltage range.

Documents

Technical documentation and resources

70-MHz Programmable-Gain Amplifiers datasheet (Rev. C)

Data sheet