TMAG3001A2YBGR
ActiveTHREE-AXIS LINEAR HALL-EFFECT SENSOR WITH I²C AND PROGRAMMABLE SWITCH IN WAFER CHIP-SCALE PACKAGE
Deep-Dive with AI
Search across all available documentation for this part.
TMAG3001A2YBGR
ActiveTHREE-AXIS LINEAR HALL-EFFECT SENSOR WITH I²C AND PROGRAMMABLE SWITCH IN WAFER CHIP-SCALE PACKAGE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TMAG3001A2YBGR |
|---|---|
| Axis [x] | X |
| Axis [y] | Y |
| Axis [z] | Z |
| Bandwidth | 1 MHz |
| Current - Output (Max) [Max] | 2 mA |
| Current - Supply (Max) [Max] | 375 µA |
| Features | Sleep Mode |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | I2C |
| Package / Case | 6-XFBGA, DSBGA |
| Resolution | 12 b |
| Sensing Range | 240 mT, 120 mT |
| Supplier Device Package | 6-DSBGA (1.22x0.82) |
| Technology | Hall Effect |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 1.65 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.17 | |
| 10 | $ 0.88 | |||
| 25 | $ 0.70 | |||
| 100 | $ 0.64 | |||
| 500 | $ 0.54 | |||
| 1000 | $ 0.48 | |||
| Digi-Reel® | 1 | $ 1.17 | ||
| 10 | $ 0.88 | |||
| 25 | $ 0.70 | |||
| 100 | $ 0.64 | |||
| 500 | $ 0.54 | |||
| 1000 | $ 0.48 | |||
| Tape & Reel (TR) | 3000 | $ 0.47 | ||
| 6000 | $ 0.44 | |||
| 9000 | $ 0.42 | |||
| 15000 | $ 0.40 | |||
| LCSC | Piece | 1 | $ 1.44 | |
| 10 | $ 1.19 | |||
| 30 | $ 1.06 | |||
| 100 | $ 0.90 | |||
| 500 | $ 0.83 | |||
| 1000 | $ 0.80 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.72 | |
| 100 | $ 0.55 | |||
| 250 | $ 0.41 | |||
| 1000 | $ 0.29 | |||
Description
General part information
TMAG3001 Series
The TMAG3001 is a low-power linear 3D Hall-effect sensor designed for a wide range of industrial and personal electronics applications. This device integrates three independent Hall-effect sensors in the X, Y, and Z axes. A precision analog signal-chain along with an integrated 12-bit ADC digitizes the measured analog magnetic field values. The I2C interface, while supporting multiple operating VCC ranges, allows seamless data communication with low-voltage microcontrollers.
The TMAG3001 can be configured through the I2C interface to enable any combination of magnetic axes and temperature measurements. Additionally, the device can be configured to various power options (including wake-up and sleep mode) allowing designers to optimize system power consumption based on their system-level needs. Multiple sensor conversion schemes and I2C read frames help optimize throughput and accuracy. A dedicated INT pin can act as a system interrupt during low power wake-up and sleep mode, and can also be used by a microcontroller to trigger a new sensor conversion. The device also features a configurable low power switch mode for magnetic or angle measurements.
An integrated angle calculation engine (CORDIC) provides full 360° angular position information for both on-axis and off-axis angle measurement topologies. The angle calculation is performed using two user-selected magnetic axes. The device features magnetic gain and offset correction to mitigate the impact of system mechanical error sources.
Documents
Technical documentation and resources