
CAT25160HU4I-GT3
Active16-KB SPI SERIAL CMOS EEPROM MEMORY/ REEL
Deep-Dive with AI
Search across all available documentation for this part.

CAT25160HU4I-GT3
Active16-KB SPI SERIAL CMOS EEPROM MEMORY/ REEL
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | CAT25160HU4I-GT3 |
|---|---|
| Clock Frequency | 10 MHz |
| Memory Format | EEPROM |
| Memory Interface | SPI |
| Memory Organization | 2K x 8 |
| Memory Size | 16 Kbit |
| Memory Type | Non-Volatile |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-UFDFN Exposed Pad |
| Supplier Device Package | 8-UDFN-EP (2x3) |
| Technology | EEPROM |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 1.8 V |
| Write Cycle Time - Word, Page | 5 ms |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.69 | |
| 10 | $ 0.62 | |||
| 25 | $ 0.59 | |||
| 50 | $ 0.57 | |||
| 100 | $ 0.55 | |||
| 250 | $ 0.52 | |||
| 500 | $ 0.50 | |||
| 1000 | $ 0.49 | |||
| Digi-Reel® | 1 | $ 0.69 | ||
| 10 | $ 0.62 | |||
| 25 | $ 0.59 | |||
| 50 | $ 0.57 | |||
| 100 | $ 0.55 | |||
| 250 | $ 0.52 | |||
| 500 | $ 0.50 | |||
| 1000 | $ 0.49 | |||
| Tape & Reel (TR) | 3000 | $ 0.46 | ||
| 6000 | $ 0.44 | |||
| 9000 | $ 0.43 | |||
| 15000 | $ 0.42 | |||
| 21000 | $ 0.42 | |||
| Newark | Each (Supplied on Full Reel) | 3000 | $ 0.47 | |
| 6000 | $ 0.44 | |||
| 12000 | $ 0.41 | |||
| 18000 | $ 0.38 | |||
| 30000 | $ 0.36 | |||
| ON Semiconductor | N/A | 1 | $ 0.38 | |
Description
General part information
CAT25160 Series
The CAT25160 are a EEPROM Serial 16-Kb SPI devices internally organized as 2048x8 bits. They feature a 32-byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. TheHOLDinput may be used to pause any serial communication with the CAT25160 device. These devices feature software and hardware write protection, including partial as well as full array protection.
Documents
Technical documentation and resources