TPS61097A-33DBVT
Active0.9VIN, 3.3VOUT BOOST CONVERTER WITH BYPASS SWITCH - 5NA SHUTDOWN CURRENT
Deep-Dive with AI
Search across all available documentation for this part.
TPS61097A-33DBVT
Active0.9VIN, 3.3VOUT BOOST CONVERTER WITH BYPASS SWITCH - 5NA SHUTDOWN CURRENT
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS61097A-33DBVT |
|---|---|
| Current - Output | 200 mA |
| Function | Step-Up |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | 1.81 mOhm |
| Package / Case | SC-74A, SOT-753 |
| Supplier Device Package | SOT-23-5 |
| Synchronous Rectifier | True |
| Topology | Boost |
| Voltage - Input (Max) [Max] | 5.5 V |
| Voltage - Input (Min) [Min] | 0.9 V |
| Voltage - Output (Min/Fixed) | 3.3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.43 | |
| 10 | $ 2.18 | |||
| 25 | $ 2.06 | |||
| 100 | $ 1.75 | |||
| Digi-Reel® | 1 | $ 2.43 | ||
| 10 | $ 2.18 | |||
| 25 | $ 2.06 | |||
| 100 | $ 1.75 | |||
| Tape & Reel (TR) | 250 | $ 1.16 | ||
| 500 | $ 1.02 | |||
| Texas Instruments | SMALL T&R | 1 | $ 1.82 | |
| 100 | $ 1.51 | |||
| 250 | $ 1.08 | |||
| 1000 | $ 0.81 | |||
Description
General part information
TPS61097A-33 Series
The TPS61097 provide a power supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd, or NiMH, or one-cell Li-Ion or Li-polymer battery. They can also be used in fuel cell or solar cell powered devices where the capability of handling low input voltages is essential. Possible output currents depend on the input-to-output voltage ratio. The devices provides output currents up to 100 mA at a 3.3-V output while using a single-cell Li-Ion or Li-Polymer battery. The boost converter is based on a current-mode controller using synchronous rectification to obtain maximum efficiency. The maximum average input current is limited to a value of 350 mA. The output voltage can be programmed by an external resistor divider, or it is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the battery is connected to the load to enable battery backup of critical functions on the load. The fixed output device is packaged in a 5-pin SOT-23 package (DBV) measuring 2.8 mm × 2.9 mm.
The TPS61097 provide a power supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd, or NiMH, or one-cell Li-Ion or Li-polymer battery. They can also be used in fuel cell or solar cell powered devices where the capability of handling low input voltages is essential. Possible output currents depend on the input-to-output voltage ratio. The devices provides output currents up to 100 mA at a 3.3-V output while using a single-cell Li-Ion or Li-Polymer battery. The boost converter is based on a current-mode controller using synchronous rectification to obtain maximum efficiency. The maximum average input current is limited to a value of 350 mA. The output voltage can be programmed by an external resistor divider, or it is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the battery is connected to the load to enable battery backup of critical functions on the load. The fixed output device is packaged in a 5-pin SOT-23 package (DBV) measuring 2.8 mm × 2.9 mm.
Documents
Technical documentation and resources
