TLIN2029DRQ1
ActiveFAULT PROTECTED LOCAL INTERCONNECT NETWORK (LIN) TRANSCEIVER WITH DOMINANT STATE TIMEOUT
Deep-Dive with AI
Search across all available documentation for this part.
TLIN2029DRQ1
ActiveFAULT PROTECTED LOCAL INTERCONNECT NETWORK (LIN) TRANSCEIVER WITH DOMINANT STATE TIMEOUT
Technical Specifications
Parameters and characteristics for this part
| Specification | TLIN2029DRQ1 |
|---|---|
| Data Rate | 20 kbps |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Protocol | LIN |
| Qualification | AEC-Q100 |
| Receiver Hysteresis | 200 mV |
| Supplier Device Package | 8-SOIC |
| Type | Transceiver |
| Voltage - Supply [Max] | 48 V |
| Voltage - Supply [Min] | 4 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.56 | |
| 10 | $ 1.39 | |||
| 25 | $ 1.32 | |||
| 100 | $ 1.09 | |||
| 250 | $ 1.02 | |||
| 500 | $ 0.90 | |||
| 1000 | $ 0.71 | |||
| Digi-Reel® | 1 | $ 1.56 | ||
| 10 | $ 1.39 | |||
| 25 | $ 1.32 | |||
| 100 | $ 1.09 | |||
| 250 | $ 1.02 | |||
| 500 | $ 0.90 | |||
| 1000 | $ 0.71 | |||
| Tape & Reel (TR) | 2500 | $ 0.66 | ||
| 5000 | $ 0.63 | |||
| 12500 | $ 0.61 | |||
| LCSC | Piece | 1 | $ 1.11 | |
| 10 | $ 0.93 | |||
| 30 | $ 0.83 | |||
| 100 | $ 0.72 | |||
| 500 | $ 0.60 | |||
| 1000 | $ 0.58 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.25 | |
| 100 | $ 0.96 | |||
| 250 | $ 0.71 | |||
| 1000 | $ 0.51 | |||
Description
General part information
TLIN2029-Q1 Series
The TLIN2029-Q1 is a local interconnect network (LIN) physical layer transceiver with integrated wake-up and protection features, compatible with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2 A and ISO/DIS 17987–4.2 standards. LIN is a single-wire bidirectional bus typically used for in-vehicle networks using data rates up to 20kbps. The TLIN2029-Q1 is designed to support 12V applications with wider operating voltage and additional bus-fault protection.
The LIN receiver supports data rates up to 100kbps for faster in-line programming. The TLIN2029-Q1 converts the data stream on the TXD input into a LIN bus signal using a current-limited wave-shaping driver which reduces electromagnetic emissions (EME). The receiver converts the data stream to logic level signals that are sent to the microprocessor through the open-drain RXD pin. Ultra-low current consumption is possible using the sleep mode which allows wake-up via LIN bus or EN pin.
The integrated resistor, electrostatic discharge (ESD) and fault protection allows designers to save board space in their applications.
Documents
Technical documentation and resources
