DS90CP22MX-8/NOPB
Active800-MBPS 2X2 LVDS CROSSPOINT SWITCH
Deep-Dive with AI
Search across all available documentation for this part.
DS90CP22MX-8/NOPB
Active800-MBPS 2X2 LVDS CROSSPOINT SWITCH
Technical Specifications
Parameters and characteristics for this part
| Specification | DS90CP22MX-8/NOPB |
|---|---|
| Circuit | 1 x 2:2 |
| Independent Circuits | 1 |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 16-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Supplier Device Package | 16-SOIC |
| Type | Crosspoint Switch |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 3 V |
| Voltage Supply Source | Single Supply |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 6.17 | |
| Digi-Reel® | 1 | $ 6.17 | ||
| Tape & Reel (TR) | 2500 | $ 3.37 | ||
| Texas Instruments | LARGE T&R | 1 | $ 4.72 | |
| 100 | $ 3.85 | |||
| 250 | $ 3.02 | |||
| 1000 | $ 2.56 | |||
Description
General part information
DS90CP22 Series
DS90CP22 is a 2x2 crosspoint switch utilizing LVDS (Low Voltage Differential Signaling) technology for low power, high speed operation. Data paths are fully differential from input to output for low noise generation and low pulse width distortion. The non-blocking design allows connection of any input to any output or outputs. LVDS I/O enable high speed data transmission for point-to-point interconnects. This device can be used as a high speed differential crosspoint, 2:1 mux, 1:2 demux, repeater or 1:2 signal splitter. The mux and demux functions are useful for switching between primary and backup circuits in fault tolerant systems. The 1:2 signal splitter and 2:1 mux functions are useful for distribution of serial bus across several rack-mounted backplanes.
The DS90CP22 accepts LVDS signal levels, LVPECL levels directly or PECL with attenuation networks.
The individual LVDS outputs can be put into TRI-STATE by use of the enable pins.
Documents
Technical documentation and resources
