BQ21080YBGR
Active800-MA LI-ION AND LIFEPO4 I²C PROGRAMMABLE LINEAR CHARGER WITH REGULATED POWER PATH IN WCSP PACKAGE
Deep-Dive with AI
Search across all available documentation for this part.
BQ21080YBGR
Active800-MA LI-ION AND LIFEPO4 I²C PROGRAMMABLE LINEAR CHARGER WITH REGULATED POWER PATH IN WCSP PACKAGE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | BQ21080YBGR |
|---|---|
| Battery Chemistry | Multi-Chemistry |
| Battery Pack Voltage [Max] | 4.6 V |
| Battery Pack Voltage [Min] | 2.2 V |
| Charge Current - Max [Max] | 800 mA |
| Current - Charging | Constant - Programmable |
| Fault Protection | Short Circuit, Over-Under Voltage, Over Temperature, Over Current |
| Interface | I2C |
| Mounting Type | Surface Mount |
| Number of Cells | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-XFBGA, DSBGA |
| Programmable Features | Voltage, Current, Timer |
| Supplier Device Package | 8-DSBGA (1.6x1.1) |
| Voltage - Supply (Max) | 5.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Arrow | N/A | 3000 | $ 0.94 | |
| 6000 | $ 0.89 | |||
| Digikey | Cut Tape (CT) | 1 | $ 2.99 | |
| 10 | $ 1.94 | |||
| 25 | $ 1.67 | |||
| 100 | $ 1.36 | |||
| 250 | $ 1.21 | |||
| 500 | $ 1.12 | |||
| 1000 | $ 1.04 | |||
| Digi-Reel® | 1 | $ 2.99 | ||
| 10 | $ 1.94 | |||
| 25 | $ 1.67 | |||
| 100 | $ 1.36 | |||
| 250 | $ 1.21 | |||
| 500 | $ 1.12 | |||
| 1000 | $ 1.04 | |||
| Tape & Reel (TR) | 3000 | $ 0.94 | ||
| 6000 | $ 0.91 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.55 | |
| 100 | $ 1.28 | |||
| 250 | $ 0.92 | |||
| 1000 | $ 0.69 | |||
Description
General part information
BQ21080 Series
The BQ21080 is a linear battery charger IC focusing on small solution size and low quiescent current for extending battery life. The device is available in an 8-ball chipscale package which does not need HDI PCB process for fabrication thereby reducing the PCB cost. The device can support up to 800-mA charging and system loads of up to 2.5 A.
The battery is charged using a standard Li-ion or LiFePO4 charge profile with three phases: precharge, constant current and constant voltage. Thermal regulation provides the maximum charge current while managing the device temperature. The charger is also optimized for battery to battery charging with 3-V minimum input voltage operation and can withstand 25-V absolute maximum line transients. The device integrates a single push-button input and reset circuitry to reduce the total solution footprint.
The BQ21080 is a linear battery charger IC focusing on small solution size and low quiescent current for extending battery life. The device is available in an 8-ball chipscale package which does not need HDI PCB process for fabrication thereby reducing the PCB cost. The device can support up to 800-mA charging and system loads of up to 2.5 A.
Documents
Technical documentation and resources