
TS5N118DBQR
Active10-V, 8:1, 1-CHANNEL GENERAL-PURPOSE FET BUS SWITCH
Deep-Dive with AI
Search across all available documentation for this part.

TS5N118DBQR
Active10-V, 8:1, 1-CHANNEL GENERAL-PURPOSE FET BUS SWITCH
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TS5N118DBQR |
|---|---|
| Circuit | 8:1 |
| Circuit | 1 |
| Independent Circuits | 1 |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 C |
| Package / Case | 16-SSOP |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Supplier Device Package | 16-SSOP |
| Type | Multiplexer/Demultiplexer |
| Voltage - Supply [Max] | 5.25 V |
| Voltage - Supply [Min] | 4.75 V |
| Voltage Supply Source | Single Supply |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | N/A | 0 | $ 2.50 | |
| Texas Instruments | LARGE T&R | 1 | $ 3.09 | |
| 100 | $ 2.71 | |||
| 250 | $ 1.90 | |||
| 1000 | $ 1.53 | |||
Description
General part information
TS5N118 Series
The TS5N118 is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of the pass transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows for minimal propagation delay and supports rail-to-rail switching on the data input/output (I/O) ports. The device also features low data I/O capacitance to minimize capacitive loading and signal distortion on the data bus. Specifically designed to support high-bandwidth applications, the TS5N118 provides an optimized interface solution ideally suited for broadband communications, networking, and data-intensive computing systems.
The TS5N118 is a 1-of-8 multiplexer/demultiplexer with a single output-enable (OE) input. The select (S0, S1, S2) inputs control the data path of the multiplexer/demultiplexer. WhenOEis low, the multiplexer/demultiplexer is enabled and the A port is connected to the B port, allowing bidirectional data flow between ports. WhenOEis high, the multiplexer/demultiplexer is disabled and a high-impedance state exists between the A and B ports.
This device is fully specified for partial-power-down applications using Ioff. The Ioffcircuitry prevents damaging current backflow through the device when it is powered down. The device has isolation during power off.
Documents
Technical documentation and resources