Integrated Circuits (ICs)

SNJ54ABT827W

Active

Texas Instruments

MILITARY 10-CH, 4.5-V TO 5.5-V BUFFERS WITH TTL-COMPATIBLE CMOS INPUTS AND 3-STATE OUTPUTS

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsLive Insertion Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)+17

Integrated Circuits (ICs)

SNJ54ABT827W

Active

Texas Instruments

MILITARY 10-CH, 4.5-V TO 5.5-V BUFFERS WITH TTL-COMPATIBLE CMOS INPUTS AND 3-STATE OUTPUTS

Deep-Dive with AI

DocumentsLive Insertion Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)+17

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	SNJ54ABT827W

null

5962-9450901 Series

Military 10-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

Part	Grade	Output Type	Number of Elements	Voltage - Supply [Min]	Voltage - Supply [Max]	Qualification	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Number of Bits per Element	Supplier Device Package	Logic Type	Current - Output High, Low [custom]	Current - Output High, Low [custom]
Texas Instruments 5962-9450901QKA	Military	3-State	1	4.5 V	5.5 V	MIL-PRF-38535L	Surface Mount	125 °C	-55 °C	10	24-CFP	Buffer Non-Inverting	24 mA	48 mA
Texas Instruments SNJ54ABT827W

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Texas Instruments	TUBE	1	$ 133.85
		100	$ 118.98
		250	$ 97.81
		1000	$ 87.49

Description

General part information

5962-9450901 Series

These 10-bit buffers or bus drivers provide a high-performance bus interface for wide data paths or buses carrying parity.

The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1\ or OE2\) input is high, all ten outputs are in the high-impedance state. The 'ABT827 provide true data at the outputs.

When VCCis between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Documents

Technical documentation and resources

SNJ54ABT827W

Deep-Dive with AI

SNJ54ABT827W

Deep-Dive with AI

Technical Specifications

5962-9450901 Series

Pricing

Description

5962-9450901 Series

Documents

Live Insertion

Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)

Selecting the Right Level Translation Solution (Rev. A)

Semiconductor Packing Material Electrostatic Discharge (ESD) Protection

Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices

LOGIC Pocket Data Book (Rev. B)

Input and Output Characteristics of Digital Integrated Circuits

TI IBIS File Creation, Validation, and Distribution Processes

Advanced Bus Interface Logic Selection Guide

Understanding Advanced Bus-Interface Products Design Guide

Family of Curves Demonstrating Output Skews for Advanced BiCMOS Devices (Rev. A)

Advanced BiCMOS Technology (ABT) Logic Enables Optimal System Design (Rev. A)

Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)

Advanced BiCMOS Technology (ABT) Logic Characterization Information (Rev. B)

Implications of Slow or Floating CMOS Inputs (Rev. E)

Designing With Logic (Rev. C)

Quad Flatpack No-Lead Logic Packages (Rev. D)

Logic Guide (Rev. AB)

SN54ABT827, SN74ABT827 datasheet (Rev. E)

5962-9450901 Series