Deep-Dive with AI
Search across all available documentation for this part.
Technical Specifications
Parameters and characteristics for this part
| Specification | SN75DP130DSRGZR |
|---|---|
| Applications | Video Display |
| Control Interface | I2C |
| Function | Redriver |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Standards | DPv 1.1a, DP v1.2 |
| Supplier Device Package | 48-VQFN (7x7) |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.90 | |
| 10 | $ 2.60 | |||
| 25 | $ 2.46 | |||
| 100 | $ 2.13 | |||
| 250 | $ 2.02 | |||
| 500 | $ 1.93 | |||
| Digi-Reel® | 1 | $ 2.90 | ||
| 10 | $ 2.60 | |||
| 25 | $ 2.46 | |||
| 100 | $ 2.13 | |||
| 250 | $ 2.02 | |||
| 500 | $ 1.93 | |||
| Tape & Reel (TR) | 2500 | $ 1.93 | ||
| Texas Instruments | LARGE T&R | 1 | $ 3.11 | |
| 100 | $ 2.73 | |||
| 250 | $ 1.91 | |||
| 1000 | $ 1.54 | |||
Description
General part information
SN75DP130 Series
The SN75DP130 device is a single channel DisplayPort™ (DP) re-driver that regenerates the DP high-speed digital link. The device complies with the VESA DisplayPort Standard Version 1.2, and supports a 4-lane Main Link interface signaling up to HBR2 rates at 5.4 Gbps per lane. This device also supports DP++ Dual-Mode, offering TMDS signaling for DVI and full HDMI Version 1.4a support.
The device compensates for PCB-related frequency loss and switching-related loss to provide the optimum DP electrical performance from source to sink. The Main Link signal inputs feature configurable equalizers with selectable boost settings. At the Main Link output, four primary levels of differential output voltage swing (VOD) and four primary levels of pre-emphasis are available. A secondary level of boost adjustment, programmed through I2C, for fine-tuning the Main Link output. The device can monitor the AUX channel and automatically adjust the output signaling levels and input equalizers in response to Link Training commands. Additionally, the SN75DP130 output signal conditioning and EQ parameters are fully programmable through the I2C interface.
The SN75DP130 is optimized for mobile applications, and contains activity detection circuitry on the Main Link input that transitions to a low-power Output Disable mode in the absence of a valid input signal. Other low-power modes are supported, including a standby mode with typical dissipation of approximately 2 mW when no video sink (for example, monitor) is connected.
Documents
Technical documentation and resources