TS3DV520ERHUR
Active1.65-GBPS 5-CHANNEL DIFFERENTIAL 10-TO-20 AND 20-TO-10 MUX FOR DVI 1.0/HDMI 1.2A APPLICATIONS
Deep-Dive with AI
Search across all available documentation for this part.
TS3DV520ERHUR
Active1.65-GBPS 5-CHANNEL DIFFERENTIAL 10-TO-20 AND 20-TO-10 MUX FOR DVI 1.0/HDMI 1.2A APPLICATIONS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TS3DV520ERHUR |
|---|---|
| Applications | Consumer Video |
| Control Interface | Serial |
| Function | Switch |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Standards | HDMI 1.2a, IEC 61000-4-2 |
| Supplier Device Package | 56-WQFN (5x11) |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.07 | |
| 10 | $ 1.86 | |||
| 25 | $ 1.75 | |||
| 100 | $ 1.49 | |||
| 250 | $ 1.40 | |||
| 500 | $ 1.23 | |||
| 1000 | $ 1.02 | |||
| Digi-Reel® | 1 | $ 2.07 | ||
| 10 | $ 1.86 | |||
| 25 | $ 1.75 | |||
| 100 | $ 1.49 | |||
| 250 | $ 1.40 | |||
| 500 | $ 1.23 | |||
| 1000 | $ 1.02 | |||
| Tape & Reel (TR) | 2000 | $ 0.95 | ||
| 6000 | $ 0.91 | |||
| 10000 | $ 0.88 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.55 | |
| 100 | $ 1.28 | |||
| 250 | $ 0.92 | |||
| 1000 | $ 0.69 | |||
Description
General part information
TS3DV520E Series
The TS3DV520E is a 20-bit to 10-bit multiplexer/demultiplexer digital video switch with a single select (SEL) input. SEL controls the data path of the multiplexer/demultiplexer. The device provides five differential channels for digital video signal switching.
This device provides low and flat ON-state resistance (ron) and excellent ON-state resistance match. Low input/output capacitance, high bandwidth, low skew, and low crosstalk among channels make this device suitable for various digital video applications, such as DVI and HDMI.
Voltage on the SEL pin should be less or equal to VCC, even in the power-down mode(VCC= 0 V).
