Specification	OPA862IDT

Applications	Data Acquisition
Mounting Type	Surface Mount
Package / Case	8-SOIC
Package / Case [x]	0.154 in
Package / Case [y]	3.9 mm
Supplier Device Package	8-SOIC
Type	ADC Driver

OPA862 Series

Part	Mounting Type	Package / Case	Package / Case [y]	Package / Case [x]	Applications	Supplier Device Package	Type	Current - Supply	Slew Rate	Voltage - Supply Span (Max) [Max]	Amplifier Type	Gain Bandwidth Product	Voltage - Supply Span (Min) [Min]	Operating Temperature [Min]	Operating Temperature [Max]	Voltage - Input Offset	Output Type	Current - Input Bias	Current - Output / Channel	Number of Circuits	Utilized IC / Part	Current - Supply (Main IC)	Channels per IC	Board Type	Supplied Contents	Voltage - Supply, Single/Dual (±) [Max]	Voltage - Supply, Single/Dual (±) [Min]
Texas Instruments OPA862IDT	Surface Mount	8-SOIC	3.9 mm	0.154 in	Data Acquisition	8-SOIC	ADC Driver
Texas Instruments OPA862IDTKR	Surface Mount	8-WFDFN Exposed Pad				8-WSON (3x3)		3.1 mA	140 V/µs	12.6 V	General Purpose	400 MHz	3 V	-40 °C	125 °C	50 µV	Rail-to-Rail	5 nA	60 mA	2
Texas Instruments OPA862DEVM									130 V/µs		General Purpose						Rail-to-Rail Single-Ended		60 mA		OPA862	3.1 mA	1 - Single	Fully Populated	Board(s)	6.3 V 12.6 V	-1.5 V 3 V
Texas Instruments OPA862IDR	Surface Mount	8-SOIC	3.9 mm	0.154 in	Data Acquisition	8-SOIC	ADC Driver

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 6.37
		10	$ 5.76
		25	$ 5.49
		100	$ 4.77
	Digi-Reel®	1	$ 6.37
		10	$ 5.76
		25	$ 5.49
		100	$ 4.77
	Tape & Reel (TR)	250	$ 4.55
		500	$ 4.15
		1250	$ 3.62
		2500	$ 3.48
Texas Instruments	SMALL T&R	1	$ 5.36
		100	$ 4.69
		250	$ 3.29
		1000	$ 2.65

Description

General part information

OPA862 Series

The OPA862 is a single-ended to differential analog-to-digital converter (ADC) driver with high input impedance for directly interfacing with sensors. The device only consumes 3.1-mA quiescent current for an output-referred noise density of 8.3 nV/√Hzin a gain of 2-V/V configuration. A fully differential amplifier configured in a gain of 1 V/V with 1-kΩ resistors must be less than 1 nV/√Hzto achieve the OPA862 equivalent output-referred noise density of 8.3 nV/√Hz. The OPA862 can be configured for other gains using external resistors. The device has a large gain-bandwidth product of 400 MHz and a slew rate of 140 V/µs. This yields exceptional linearity and fast-settling, 18-bit performance over comparable single-ended-to-differential ADC drivers. The device includes a reference input pin for setting the output common-mode voltage.

The OPA862 is fully characterized to operate over a wide supply range of 3 V to 12.6 V, and features a rail-to-rail output stage. The device is fabricated using Texas Instruments’ proprietary, high-speed, silicon-germanium (SiGe) process and achieves exceptional distortion performance for 18-bit systems. The device includes a disable mode that consumes only 12-µA quiescent current in power-down state.

The OPA862 is rated to work over the extended industrial temperature range of –40°C to +125°C.

Documents

Technical documentation and resources

OPA862D Evaluation Module

EVM User's guide

Noise Analysis for High Speed Op Amps (Rev. A)

Application note

OPA862 High Input Impedance, Single-Ended to Differential ADC Driver datasheet (Rev. C)

Data sheet