TS3USB30EDGSR
ActiveHIGH-SPEED USB 2.0 1:2 MUX/DEMUX SWITCH WITH SINGLE ENABLE AND ESD PROTECTION
Deep-Dive with AI
Search across all available documentation for this part.
TS3USB30EDGSR
ActiveHIGH-SPEED USB 2.0 1:2 MUX/DEMUX SWITCH WITH SINGLE ENABLE AND ESD PROTECTION
Technical Specifications
Parameters and characteristics for this part
| Specification | TS3USB30EDGSR |
|---|---|
| -3db Bandwidth | 900 MHz |
| Applications | USB |
| Features | USB 2.0, Bi-Directional |
| Mounting Type | Surface Mount |
| Number of Channels | 1 |
| On-State Resistance (Max) [Max] | 10 Ohms |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 10-MSOP, 10-TFSOP |
| Package / Case [x] | 3 mm |
| Package / Case [x] | 0.118 in |
| Supplier Device Package | 10-VSSOP |
| Switch Circuit | DPDT |
| Voltage - Supply, Single (V+) [Max] | 4.3 V |
| Voltage - Supply, Single (V+) [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.44 | |
| 10 | $ 1.29 | |||
| 25 | $ 1.23 | |||
| 100 | $ 1.01 | |||
| 250 | $ 0.94 | |||
| 500 | $ 0.83 | |||
| 1000 | $ 0.66 | |||
| Digi-Reel® | 1 | $ 1.44 | ||
| 10 | $ 1.29 | |||
| 25 | $ 1.23 | |||
| 100 | $ 1.01 | |||
| 250 | $ 0.94 | |||
| 500 | $ 0.83 | |||
| 1000 | $ 0.66 | |||
| Tape & Reel (TR) | 2500 | $ 0.61 | ||
| 5000 | $ 0.58 | |||
| 12500 | $ 0.56 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 0.99 | |
| 10 | $ 0.77 | |||
| 25 | $ 0.73 | |||
| 50 | $ 0.70 | |||
| 100 | $ 0.67 | |||
| 250 | $ 0.65 | |||
| 500 | $ 0.63 | |||
| 1000 | $ 0.62 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.49 | |
| 100 | $ 0.38 | |||
| 250 | $ 0.28 | |||
| 1000 | $ 0.20 | |||
Description
General part information
TS3USB30E Series
The TS3USB30E is a high-bandwidth 1:2 switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1400MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs, or from two different hosts to one corresponding output. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. The TS3USB30E is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480Mbps).
The TS3USB30E integrates ESD protection cells on all pins, is available in a tiny UQFN package (1.8mm × 1.4mm) or a VSSOP package, and is characterized over the free-air temperature range of –40°C to 85°C.
The TS3USB30E is a high-bandwidth 1:2 switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1400MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs, or from two different hosts to one corresponding output. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. The TS3USB30E is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480Mbps).
Documents
Technical documentation and resources
