Specification	LPC660AIM/NOPB

Amplifier Type	CMOS
Current - Input Bias	0.002 pA
Current - Output / Channel [custom]	40 mA
Current - Supply	160 µA
Gain Bandwidth Product	350 kHz
Mounting Type	Surface Mount
Number of Circuits	4
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	Push-Pull, Rail-to-Rail
Package / Case	14-SOIC
Package / Case [x]	0.154 in
Package / Case [y]	3.9 mm
Slew Rate	0.11 V/µs
Voltage - Input Offset	1 mV
Voltage - Supply Span (Max) [Max]	15.5 V
Voltage - Supply Span (Min) [Min]	4.75 V

LPC660 Series

Quad, 15-V, 350-kHz operational amplifier

Part	Operating Temperature [Max]	Operating Temperature [Min]	Amplifier Type	Gain Bandwidth Product	Mounting Type	Current - Supply	Output Type	Current - Input Bias	Voltage - Input Offset	Voltage - Supply Span (Min) [Min]	Voltage - Supply Span (Max) [Max]	Slew Rate	Current - Output / Channel [custom]	Number of Circuits	Package / Case [x]	Package / Case [y]	Package / Case
Texas Instruments LPC660AIMX/NOPB	85 °C	-40 °C	CMOS	350 kHz	Surface Mount	160 µA	Push-Pull Rail-to-Rail	0.002 pA	1 mV	4.75 V	15.5 V	0.11 V/µs	40 mA	4	0.154 in	3.9 mm	14-SOIC
Texas Instruments LPC660IMX/NOPB	85 °C	-40 °C	CMOS	350 kHz	Surface Mount	160 µA	Push-Pull Rail-to-Rail	0.002 pA	1 mV	4.75 V	15.5 V	0.11 V/µs	40 mA	4	0.154 in	3.9 mm	14-SOIC
Texas Instruments LPC660AIM/NOPB	85 °C	-40 °C	CMOS	350 kHz	Surface Mount	160 µA	Push-Pull Rail-to-Rail	0.002 pA	1 mV	4.75 V	15.5 V	0.11 V/µs	40 mA	4	0.154 in	3.9 mm	14-SOIC
Texas Instruments LPC660AIM	85 °C	-40 °C	CMOS	350 kHz	Surface Mount	160 µA	Push-Pull Rail-to-Rail	0.002 pA	1 mV	4.75 V	15.5 V	0.11 V/µs	40 mA	4	0.154 in	3.9 mm	14-SOIC
Texas Instruments LPC660IMX	85 °C	-40 °C	CMOS	350 kHz	Surface Mount	160 µA	Push-Pull Rail-to-Rail	0.002 pA	1 mV	4.75 V	15.5 V	0.11 V/µs	40 mA	4	0.154 in	3.9 mm	14-SOIC
Texas Instruments LPC660AIMX	85 °C	-40 °C	CMOS	350 kHz	Surface Mount	160 µA	Push-Pull Rail-to-Rail	0.002 pA	1 mV	4.75 V	15.5 V	0.11 V/µs	40 mA	4	0.154 in	3.9 mm	14-SOIC
Texas Instruments LPC660IM/NOPB	85 °C	-40 °C	CMOS	350 kHz	Surface Mount	160 µA	Push-Pull Rail-to-Rail	0.002 pA	1 mV	4.75 V	15.5 V	0.11 V/µs	40 mA	4	0.154 in	3.9 mm	14-SOIC

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	275	$ 3.23
Texas Instruments	TUBE	1	$ 5.17
		100	$ 4.54
		250	$ 3.18
		1000	$ 2.56

Description

General part information

LPC660 Series

The LPC660 CMOS Quad operational amplifier is ideal for operation from a single supply. It features a wide range of operating voltages from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain (into 100 kΩ and 5 kΩ) are all equal to or better than widely accepted bipolar equivalents, while the power supply requirement is typically less than 1 mW.

This chip is built with National's advanced Double-Poly Silicon-Gate CMOS process.

See the LPC662 datasheet for a Dual CMOS operational amplifier and LPC661 datasheet for a single CMOS operational amplifier with these same features.

Documents

Technical documentation and resources

LPC660 Low Power CMOS Quad Operational Amplifier datasheet (Rev. D)

Data sheet