Deep-Dive with AI
Search across all available documentation for this part.
Technical Specifications
Parameters and characteristics for this part
| Specification | TPD1S414YZR |
|---|---|
| Fault Protection | Over Temperature |
| Features | Slew Rate Controlled |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 12-UFBGA, DSBGA |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 39 mOhm |
| Supplier Device Package | 12-DSBGA |
| Switch Type | USB Switch |
| Voltage - Load | 30 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.10 | |
| 10 | $ 0.98 | |||
| 25 | $ 0.93 | |||
| 100 | $ 0.77 | |||
| 250 | $ 0.72 | |||
| 500 | $ 0.63 | |||
| 1000 | $ 0.50 | |||
| Digi-Reel® | 1 | $ 1.10 | ||
| 10 | $ 0.98 | |||
| 25 | $ 0.93 | |||
| 100 | $ 0.77 | |||
| 250 | $ 0.72 | |||
| 500 | $ 0.63 | |||
| 1000 | $ 0.50 | |||
| Tape & Reel (TR) | 3000 | $ 0.47 | ||
| 6000 | $ 0.44 | |||
| 15000 | $ 0.43 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.81 | |
| 100 | $ 0.63 | |||
| 250 | $ 0.46 | |||
| 1000 | $ 0.33 | |||
Description
General part information
TPD1S414 Series
The TPD1S414 device is a single-chip solution for a USB connector’s VBUSline protection. The bidirectional nFET switch ensures safe current flow in both charging and host mode while protecting the internal system circuits from any overvoltage conditions at the VBUS_CONpin. On the VBUS_CONpin, this device can handle overvoltage protection up to 30 V. After theENpin toggles low, the TPD1S414 waits 20 ms before turning ON the nFET through a soft-start delay.ACKpin indicates the FET is completely turned ON.
The typical application interface for the TPD1S414 is the VBUSline in USB connectors. Typical end equipment for TPD1S414 are mobiles phones, tablets, wearables, and electronic-point-of-sale (EPOS). The TPD1S414 can also be applied to any system using an interface with a 5-V power rail.
The TPD1S414 device is a single-chip solution for a USB connector’s VBUSline protection. The bidirectional nFET switch ensures safe current flow in both charging and host mode while protecting the internal system circuits from any overvoltage conditions at the VBUS_CONpin. On the VBUS_CONpin, this device can handle overvoltage protection up to 30 V. After theENpin toggles low, the TPD1S414 waits 20 ms before turning ON the nFET through a soft-start delay.ACKpin indicates the FET is completely turned ON.
Documents
Technical documentation and resources
