DRV8452PWPR
Active50-V, 5-A, DUAL H-BRIDGE STEPPER MOTOR DRIVER WITH SMART TUNE, STALL DETECT AND AUTO-TORQUE
Deep-Dive with AI
Search across all available documentation for this part.
DRV8452PWPR
Active50-V, 5-A, DUAL H-BRIDGE STEPPER MOTOR DRIVER WITH SMART TUNE, STALL DETECT AND AUTO-TORQUE
Technical Specifications
Parameters and characteristics for this part
| Specification | DRV8452PWPR |
|---|---|
| Applications | General Purpose |
| Current - Output | 4 A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Interface | Step/Direction |
| Motor Type - AC, DC | Brushless DC (BLDC), Brushed DC |
| Motor Type - Stepper | Bipolar |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Half Bridge (4) |
| Package / Case | 28-PowerTSSOP |
| Package / Case [custom] | 4.4 mm |
| Package / Case [custom] | 0.173 " |
| Step Resolution [Max] | 1 |
| Step Resolution [Min] | 0.00390625 |
| Supplier Device Package | 28-HTSSOP |
| Technology | Power MOSFET |
| Voltage - Load [Max] | 55 V |
| Voltage - Load [Min] | 4.5 V |
| Voltage - Supply [Max] | 55 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 6.25 | |
| 10 | $ 5.65 | |||
| 25 | $ 5.38 | |||
| 100 | $ 4.67 | |||
| 250 | $ 4.46 | |||
| 500 | $ 4.07 | |||
| 1000 | $ 3.55 | |||
| Digi-Reel® | 1 | $ 6.25 | ||
| 10 | $ 5.65 | |||
| 25 | $ 5.38 | |||
| 100 | $ 4.67 | |||
| 250 | $ 4.46 | |||
| 500 | $ 4.07 | |||
| 1000 | $ 3.55 | |||
| Tape & Reel (TR) | 2500 | $ 3.41 | ||
| Texas Instruments | LARGE T&R | 1 | $ 4.78 | |
| 100 | $ 3.90 | |||
| 250 | $ 3.06 | |||
| 1000 | $ 2.60 | |||
Description
General part information
DRV8452 Series
The DRV8452 is a wide-voltage, high-power, high-performance stepper motor driver. The device supports up to 55-V supply voltage, and integrated MOSFETs with 100 mΩ HS + LS on-resistance allow up to 5-A current.
The auto-torque feature boosts efficiency by adjusting the current according to load torque. Standstill power saving mode reduces power loss during motor holding condition. Silent step guarantees noiseless operation at low speeds and standstill. Internal current sense eliminates the need for sense resistors, therefore saving PCB area and cost. Built-in indexer supports up to 1/256 microstepping, and the automatic microstepping mode interpolates the input STEP signal to reduce overhead on the controller. Sensorless stall detection eliminates end stops from the system. The device supports other protection and diagnostic features for robust and reliable operation.
The DRV8452 requires minimal tuning to configure the features. It supports higher power density than external FET drivers, with a smaller PCB area. High energy efficiency coupled with precise, noiseless operation makes the DRV8452 an ideal choice for high-performance stepper systems.
