Specification	TPS6735IP

Current - Output	200 mA
Frequency - Switching	160 kHz
Function	Step-Down, Step-Up
Mounting Type	Through Hole
Number of Outputs	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Configuration	Negative
Output Type	1.81 mOhm
Package / Case	0.3 in
Package / Case	8-DIP
Package / Case	7.62 mm
Supplier Device Package	8-PDIP
Synchronous Rectifier	False
Topology	Buck
Voltage - Input (Max) [Max]	6.2 V
Voltage - Input (Min) [Min]	4 V
Voltage - Output (Min/Fixed) [Min]	-5 V

TPS6735 Series

Part	Operating Temperature [Max]	Operating Temperature [Min]	Function	Voltage - Input (Min) [Min]	Output Configuration	Supplier Device Package	Current - Output	Mounting Type	Topology	Voltage - Output (Min/Fixed) [Min]	Package / Case	Package / Case [y]	Package / Case [x]	Number of Outputs	Voltage - Input (Max) [Max]	Frequency - Switching	Output Type	Package / Case	Package / Case
Texas Instruments TPS6735ID	85 °C	-40 °C	Step-Down Step-Up	4 V	Negative	8-SOIC	200 mA	Surface Mount	Buck	-5 V	8-SOIC	3.9 mm	0.154 in	1	6.2 V	160 kHz	1.81 mOhm
Texas Instruments TPS6735IDRG4	85 °C	-40 °C	Step-Down Step-Up	4 V	Negative	8-SOIC	200 mA	Surface Mount	Buck	-5 V	8-SOIC	3.9 mm	0.154 in	1	6.2 V	160 kHz	1.81 mOhm
Texas Instruments TPS6735IDR	85 °C	-40 °C	Step-Down Step-Up	4 V	Negative	8-SOIC	200 mA	Surface Mount	Buck	-5 V	8-SOIC	3.9 mm	0.154 in	1	6.2 V	160 kHz	1.81 mOhm
Texas Instruments TPS6735IPE4	85 °C	-40 °C	Step-Down	4 V	Negative	8-PDIP	200 mA	Through Hole	Buck	-5 V	8-DIP			1	6.2 V	160 kHz	1.81 mOhm	0.3 in	7.62 mm
Texas Instruments TPS6735IP	85 °C	-40 °C	Step-Down Step-Up	4 V	Negative	8-PDIP	200 mA	Through Hole	Buck	-5 V	8-DIP			1	6.2 V	160 kHz	1.81 mOhm	0.3 in	7.62 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 5.61
		10	$ 5.06
		50	$ 4.83
		100	$ 4.19
		250	$ 4.15
Texas Instruments	TUBE	1	$ 7.02
		100	$ 5.72
		250	$ 4.50
		1000	$ 3.81

Description

General part information

TPS6735 Series

The TPS6735 is a fixed negative 5-V output inverting dc/dc converter capable of delivering 200 mA from inputs as low as 4.5 V. The only external components required are an inductor, an output filter capacitor, an input filter capacitor, a reference filter capacitor, and a Schottky rectifier. An enable input is provided to shut down the inverter when a -5-V output is not needed. The typical supply current is 1.9 mA at no-load and is further reduced to 1-uA when the enable input is low.

The TPS6735 is a 160-kHz current-mode pulse-width-modulation (PWM) controller with a p-channel MOSFET power switch. The gate drive uses the -5-V output to reduce the die area needed to realize the 0.4-MOSFET. Soft start is accomplished with the addition of one small capacitor at SS. A 1.22-V reference is available for external loads up to 125 uA.

The TPS6735 is attractive for board-level dc/dc conversion in computer peripherals and in battery-powered equipment requiring high efficiency and low supply current.

Documents

Technical documentation and resources

Datasheet

Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B)

Application note