
SN74CBTLV3125RGYR
Active3.3-V, 1:1 (SPST), 4-CHANNEL FET BUS SWITCH WITH POWERED-OFF PROTECTION
Deep-Dive with AI
Search across all available documentation for this part.

SN74CBTLV3125RGYR
Active3.3-V, 1:1 (SPST), 4-CHANNEL FET BUS SWITCH WITH POWERED-OFF PROTECTION
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74CBTLV3125RGYR |
|---|---|
| Circuit | 1 x 1:1 |
| Independent Circuits | 4 |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 14-VFQFN Exposed Pad |
| Supplier Device Package | 14-VQFN (3.5x3.5) |
| Type | Bus Switch |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 2.3 V |
| Voltage Supply Source | Single Supply |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.73 | |
| 10 | $ 0.64 | |||
| 25 | $ 0.60 | |||
| 100 | $ 0.49 | |||
| 250 | $ 0.46 | |||
| 500 | $ 0.39 | |||
| 1000 | $ 0.31 | |||
| Digi-Reel® | 1 | $ 0.73 | ||
| 10 | $ 0.64 | |||
| 25 | $ 0.60 | |||
| 100 | $ 0.49 | |||
| 250 | $ 0.46 | |||
| 500 | $ 0.39 | |||
| 1000 | $ 0.31 | |||
| Tape & Reel (TR) | 3000 | $ 0.28 | ||
| 6000 | $ 0.26 | |||
| 15000 | $ 0.25 | |||
| 30000 | $ 0.24 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.42 | |
| 100 | $ 0.28 | |||
| 250 | $ 0.22 | |||
| 1000 | $ 0.14 | |||
Description
General part information
SN74CBTLV3125 Series
The SN74CBTLV3125 quadruple FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE\) input is high.
This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Documents
Technical documentation and resources