Integrated Circuits (ICs)

SN74LVTH16241DLR

Obsolete

Texas Instruments

BUFFER/LINE DRIVER 16-CH NON-INVERTING 3-ST BICMOS 48-PIN SSOP T/R

Deep-Dive with AI

Search across all available documentation for this part.

Integrated Circuits (ICs)

SN74LVTH16241DLR

Obsolete

Texas Instruments

BUFFER/LINE DRIVER 16-CH NON-INVERTING 3-ST BICMOS 48-PIN SSOP T/R

Deep-Dive with AI

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	SN74LVTH16241DLR

Current - Output High, Low [custom]	64 mA
Current - Output High, Low [custom]	32 mA
Logic Type	Buffer, Non-Inverting
Mounting Type	Surface Mount
Number of Bits per Element	4
Number of Elements	4
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	3-State
Package / Case	48-BSSOP
Package / Case [y]	0.295 in
Package / Case [y]	7.5 mm
Supplier Device Package	48-SSOP
Voltage - Supply [Max]	3.6 V
Voltage - Supply [Min]	2.7 V

SN74LVTH16241 Series

16-ch, 2.7-V to 3.6-V buffers with bus-hold, TTL-compatible CMOS inputs and 3-state outputs

Part	Mounting Type	Logic Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Supplier Device Package	Package / Case [y]	Package / Case	Package / Case [y]	Current - Output High, Low [custom]	Current - Output High, Low [custom]	Operating Temperature [Max]	Operating Temperature [Min]	Number of Bits per Element	Output Type	Number of Elements
Texas Instruments SN74LVTH16241DLR	Surface Mount	Buffer Non-Inverting	2.7 V	3.6 V	48-SSOP	0.295 in	48-BSSOP	7.5 mm	64 mA	32 mA	85 °C	-40 °C	4	3-State	4
Texas Instruments SN74LVTH16241DL	Surface Mount	Buffer Non-Inverting	2.7 V	3.6 V	48-SSOP	0.295 in	48-BSSOP	7.5 mm	64 mA	32 mA	85 °C	-40 °C	4	3-State	4

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Description

General part information

SN74LVTH16241 Series

These 16-bit buffers/drivers are designed specifically for low-voltage (3.3-V) VCCoperation, but with the capability to provide a TTL interface to a 5-V system environment.

The devices can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. The devices provide noninverting outputs and complementary output-enable (OE andOE) inputs.

When VCCis between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V,OEshould be tied to VCCthrough a pullup resistor and OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sinking/current-sourcing capability of the driver.

Documents

Technical documentation and resources

No documents available