THS7001CPWPR
Active70-MHZ HIGH-SPEED PROGRAMMABLE-GAIN AMPLIFIER
Deep-Dive with AI
Search across all available documentation for this part.
THS7001CPWPR
Active70-MHZ HIGH-SPEED PROGRAMMABLE-GAIN AMPLIFIER
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | THS7001CPWPR |
|---|---|
| -3db Bandwidth | 100 MHz |
| Amplifier Type | Programmable Gain |
| Current - Input Bias | 2.5 µA |
| Current - Supply | 7 mA |
| Mounting Type | Surface Mount |
| Number of Circuits | 1 |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 20-PowerTSSOP |
| Package / Case | 0.173 in |
| Package / Case [custom] | 4.4 mm |
| Slew Rate | 85 V/µs |
| Supplier Device Package | 20-HTSSOP |
| Voltage - Input Offset | 1 mV |
| Voltage - Supply Span (Max) [Max] | 32 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 2000 | $ 3.79 | |
| Texas Instruments | LARGE T&R | 1 | $ 6.10 | |
| 100 | $ 4.98 | |||
| 250 | $ 3.91 | |||
| 1000 | $ 3.32 | |||
Description
General part information
THS7001 Series
The THS7001 (single) and THS7002 (dual) are high-speed programmable-gain amplifiers, ideal for applications where load impedance can often vary. Each channel on this device consists of a separate low-noise input preamp and a programmable gain amplifier (PGA). The preamp is a voltage-feedback amplifier offering a low 1.7-nV/Hzvoltage noise with a 100-MHz (-3 dB) bandwidth. The output pin of the preamp is accessible so that filters can be easily added to the amplifier.
The 3-bit digitally-controlled PGA provides a -22-dB to 20-dB attenuation/gain range with a 6-dB step resolution. In addition, the PGA provides both high and low output clamp protection to prevent the output signal from swinging outside the common-mode input range of an analog-to-digital converter. The PGA provides a wide 70-MHz (-3 dB) bandwidth, which remains relatively constant over the entire gain/attenuation range. Independent shutdown control is also provided for power conservation and multiplexing. These devices operate over a wide ±4.5-V to ±16-V supply voltage range.
The THS7001 (single) and THS7002 (dual) are high-speed programmable-gain amplifiers, ideal for applications where load impedance can often vary. Each channel on this device consists of a separate low-noise input preamp and a programmable gain amplifier (PGA). The preamp is a voltage-feedback amplifier offering a low 1.7-nV/Hzvoltage noise with a 100-MHz (-3 dB) bandwidth. The output pin of the preamp is accessible so that filters can be easily added to the amplifier.
Documents
Technical documentation and resources