Specification	SN74ABT827DBR

Current - Output High, Low [custom]	64 mA
Current - Output High, Low [custom]	32 mA
Logic Type	Buffer, Non-Inverting
Mounting Type	Surface Mount
Number of Bits per Element	10
Number of Elements	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	3-State
Package / Case	24-SSOP
Supplier Device Package	24-SSOP
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V

SN74ABT827 Series

10-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

Part	Number of Elements	Voltage - Supply [Min]	Voltage - Supply [Max]	Supplier Device Package	Number of Bits per Element	Logic Type	Operating Temperature [Max]	Operating Temperature [Min]	Mounting Type	Package / Case	Package / Case	Current - Output High, Low [custom]	Current - Output High, Low [custom]	Output Type	Package / Case [custom]	Package / Case [custom]	Package / Case	Package / Case
Texas Instruments SN74ABT827PWG4	1	4.5 V	5.5 V	24-TSSOP	10	Buffer Non-Inverting	85 °C	-40 °C	Surface Mount	24-TSSOP	0.173 in 4.4 mm	64 mA	32 mA	3-State
Texas Instruments SN74ABT827DWR	1	4.5 V	5.5 V	24-SOIC	10	Buffer Non-Inverting	85 °C	-40 °C	Surface Mount	24-SOIC		64 mA	32 mA	3-State	7.5 mm	0.295 in
Texas Instruments SN74ABT827NT	1	4.5 V	5.5 V	24-PDIP	10	Buffer Non-Inverting	85 °C	-40 °C	Through Hole	24-DIP		64 mA	32 mA	3-State			0.3 in	7.62 mm
Texas Instruments SN74ABT827DBR	1	4.5 V	5.5 V	24-SSOP	10	Buffer Non-Inverting	85 °C	-40 °C	Surface Mount	24-SSOP		64 mA	32 mA	3-State
Texas Instruments SN74ABT827DW	1	4.5 V	5.5 V	24-SOIC	10	Buffer Non-Inverting	85 °C	-40 °C	Surface Mount	24-SOIC		64 mA	32 mA	3-State	7.5 mm	0.295 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.43
	Digi-Reel®	1	$ 2.43
	Tape & Reel (TR)	2000	$ 1.11
		6000	$ 1.07
Texas Instruments	LARGE T&R	1	$ 1.83
		100	$ 1.51
		250	$ 1.08
		1000	$ 0.82

Description

General part information

SN74ABT827 Series

These 10-bit buffers or bus drivers provide a high-performance bus interface for wide data paths or buses carrying parity.

The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1\ or OE2\) input is high, all ten outputs are in the high-impedance state. The 'ABT827 provide true data at the outputs.

When VCCis between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Documents

Technical documentation and resources

SN74ABT827DBR

Deep-Dive with AI

SN74ABT827DBR

Deep-Dive with AI

Technical Specifications

SN74ABT827 Series

Pricing

Description

SN74ABT827 Series

Documents

Understanding Advanced Bus-Interface Products Design Guide

SN54ABT827, SN74ABT827 datasheet (Rev. E)

Semiconductor Packing Material Electrostatic Discharge (ESD) Protection

Family of Curves Demonstrating Output Skews for Advanced BiCMOS Devices (Rev. A)

Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices

Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)

Advanced BiCMOS Technology (ABT) Logic Characterization Information (Rev. B)

Designing With Logic (Rev. C)

Input and Output Characteristics of Digital Integrated Circuits

Logic Guide (Rev. AB)

Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)

Implications of Slow or Floating CMOS Inputs (Rev. E)

Advanced Bus Interface Logic Selection Guide

Quad Flatpack No-Lead Logic Packages (Rev. D)

Selecting the Right Level Translation Solution (Rev. A)

LOGIC Pocket Data Book (Rev. B)

Advanced BiCMOS Technology (ABT) Logic Enables Optimal System Design (Rev. A)

Live Insertion

TI IBIS File Creation, Validation, and Distribution Processes

SN74ABT827 Series