Specification	SN74CBTLV16800GR

Circuit	10
Circuit	1:1
Independent Circuits	2
Mounting Type	Surface Mount
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	48-TFSOP
Package / Case	0.24 in
Package / Case [custom]	6.1 mm
Supplier Device Package	48-TSSOP
Type	Bus Switch
Voltage - Supply [Max]	3.6 V
Voltage - Supply [Min]	2.3 V
Voltage Supply Source	Single Supply

SN74CBTLV16800 Series

3.3-V, 1:1 (SPST), 20-channel FET bus switch with precharged outputs

Part	Voltage Supply Source	Supplier Device Package	Type	Package / Case	Package / Case	Package / Case [custom]	Circuit	Circuit	Independent Circuits	Voltage - Supply [Min]	Voltage - Supply [Max]	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]
Texas Instruments SN74CBTLV16800GR	Single Supply	48-TSSOP	Bus Switch	48-TFSOP	0.24 in	6.1 mm	10	1:1	2	2.3 V	3.6 V	Surface Mount	85 °C	-40 °C
Texas Instruments SN74CBTLV16800VR	Single Supply		Bus Switch	48-TFSOP	0.173 in 4.4 mm		10	1:1	2	2.3 V	3.6 V	Surface Mount	85 °C	-40 °C

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 1.60
	Digi-Reel®	1	$ 1.60
	Tape & Reel (TR)	2000	$ 0.68
		6000	$ 0.64
		10000	$ 0.62
Texas Instruments	LARGE T&R	1	$ 1.19
		100	$ 0.91
		250	$ 0.67
		1000	$ 0.48

Description

General part information

SN74CBTLV16800 Series

The SN74CBTLV16800 provides 20 bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device also precharges the B port to a user-selectable bias voltage (BIASV) to minimize live-insertion noise.

The device is organized as dual 10-bit bus switches with separate output-enable (OE\) inputs. It can be used as two 10-bit bus switches or one 20-bit bus switch. When OE\ is low, the associated 10-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, the high-impedance state exists between the two ports, and port B is precharged to BIASV through the equivalent of a 10-kresistor.

This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.

Documents

Technical documentation and resources

SN74CBTLV16800GR

Deep-Dive with AI

SN74CBTLV16800GR

Deep-Dive with AI

Technical Specifications

SN74CBTLV16800 Series

Pricing

Description

SN74CBTLV16800 Series

Documents

Texas Instruments Little Logic Application Report

Multiplexers and Signal Switches Glossary (Rev. B)

Semiconductor Packing Material Electrostatic Discharge (ESD) Protection

Signal Switch Data Book (Rev. A)

TI IBIS File Creation, Validation, and Distribution Processes

Design Summary for WCSP Little Logic (Rev. B)

Bus FET Switch Solutions for Live Insertion Applications

Standard Linear & Logic for PCs, Servers & Motherboards

Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)

SN74CBTLV16800 datasheet (Rev. J)

LOGIC Pocket Data Book (Rev. B)

Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)

CBT (5-V) And CBTLV (3.3-V) Bus Switches Data Book (Rev. B)

Selecting the Correct Texas Instruments Signal Switch (Rev. E)

Digital Bus Switch Selection Guide (Rev. A)

Little Logic Guide 2018 (Rev. G)

Logic Guide (Rev. AB)

How to Select Little Logic (Rev. A)

SN74CBTLV16800 Series