Integrated Circuits (ICs)

MAX213IDWR

Obsolete

Texas Instruments

5-V MULTICHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-9V OUTPUT & +/-15-KV ESD PROTECTION

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsMAX213 datasheet

Integrated Circuits (ICs)

MAX213IDWR

Obsolete

Texas Instruments

5-V MULTICHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-9V OUTPUT & +/-15-KV ESD PROTECTION

Deep-Dive with AI

DocumentsMAX213 datasheet

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	MAX213IDWR

Data Rate	120 Kbps
Duplex	Full
Mounting Type	Surface Mount
Number of Drivers/Receivers [custom]	5
Number of Drivers/Receivers [custom]	4
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	28-SOIC
Package / Case [x]	0.295 in
Package / Case [y]	7.5 mm
Protocol	RS232
Receiver Hysteresis	500 mV
Supplier Device Package	28-SOIC
Type	Transceiver
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V

MAX213 Series

Part	Package / Case	Package / Case [x]	Package / Case [y]	Operating Temperature [Max]	Operating Temperature [Min]	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Voltage - Supply [Min]	Voltage - Supply [Max]	Data Rate	Receiver Hysteresis	Mounting Type	Supplier Device Package	Duplex	Type	Protocol	Package / Case [custom]	Package / Case [custom]
Texas Instruments MAX213IDWG4	28-SOIC	0.295 in	7.5 mm	85 °C	-40 °C	5	4	4.5 V	5.5 V	120 Kbps	500 mV	Surface Mount	28-SOIC	Full	Transceiver	RS232
Texas Instruments MAX213IDW	28-SOIC	0.295 in	7.5 mm	85 °C	-40 °C	5	4	4.5 V	5.5 V	120 Kbps	500 mV	Surface Mount	28-SOIC	Full	Transceiver	RS232
Texas Instruments MAX213IDB	28-SSOP			85 °C	-40 °C	5	4	4.5 V	5.5 V	120 Kbps	500 mV	Surface Mount	28-SSOP	Full	Transceiver	RS232	0.209 in	5.3 mm
Texas Instruments MAX213CDB	28-SSOP			70 °C	0 °C	5	4	4.5 V	5.5 V	120 Kbps	500 mV	Surface Mount	28-SSOP	Full	Transceiver	RS232	0.209 in	5.3 mm
Texas Instruments MAX213CDBR	28-SSOP			70 °C	0 °C	5	4	4.5 V	5.5 V	120 Kbps	500 mV	Surface Mount	28-SSOP	Full	Transceiver	RS232	0.209 in	5.3 mm
Texas Instruments MAX213IDWR	28-SOIC	0.295 in	7.5 mm	85 °C	-40 °C	5	4	4.5 V	5.5 V	120 Kbps	500 mV	Surface Mount	28-SOIC	Full	Transceiver	RS232
Texas Instruments MAX213IDBR	28-SSOP			85 °C	-40 °C	5	4	4.5 V	5.5 V	120 Kbps	500 mV	Surface Mount	28-SSOP	Full	Transceiver	RS232	0.209 in	5.3 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Texas Instruments	LARGE T&R	1	$ 2.67
		100	$ 2.34
		250	$ 1.64
		1000	$ 1.32

Description

General part information

MAX213 Series

The MAX213 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5-V supply. The devices operate at data signaling rates up to 120 kbit/s and a maximum of 30-V/µs driver output slew rate.

The MAX213 has an active-low shutdown (SHDN) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V– is pulled to GND, and the transmitter outputs are disabled. This reduces supply current typically to 1 µA. Two receivers of the MAX213 are active during shutdown.

Documents

Technical documentation and resources

MAX213 datasheet

Data sheet