
MP5094GJ-Z
ActivePOWER LOAD DISTRIBUTION SWITCH, ACTIVE LOW, 2 O/P, 12 V, 4 A, 0.05 OHM,TSOT-23-8
Deep-Dive with AI
Search across all available documentation for this part.

MP5094GJ-Z
ActivePOWER LOAD DISTRIBUTION SWITCH, ACTIVE LOW, 2 O/P, 12 V, 4 A, 0.05 OHM,TSOT-23-8
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MP5094GJ-Z |
|---|---|
| Current - Output (Max) | 8 A |
| Fault Protection | Over Temperature, Over Voltage, UVLO, Current Limiting (Fixed) |
| Input Type | Non-Inverting |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 C |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Ratio - Input:Output | 1:1 |
| Rds On (Typ) | 50 mOhm, 30 mOhm |
| Supplier Device Package | TSOT-23-8 |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 5.5 V, 14.5 V |
| Voltage - Load [Min] | 10.2 V, 4.6 V |
| Voltage - Supply (Vcc/Vdd) | Not Required |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.07 | |
| 10 | $ 1.29 | |||
| 25 | $ 1.08 | |||
| 100 | $ 0.85 | |||
| 250 | $ 0.74 | |||
| 500 | $ 0.67 | |||
| 1000 | $ 0.61 | |||
| Digi-Reel® | 1 | $ 2.07 | ||
| 10 | $ 1.29 | |||
| 25 | $ 1.08 | |||
| 100 | $ 0.85 | |||
| 250 | $ 0.74 | |||
| 500 | $ 0.67 | |||
| 1000 | $ 0.61 | |||
| N/A | 2259 | $ 1.19 | ||
| Tape & Reel (TR) | 3000 | $ 0.54 | ||
| 6000 | $ 0.51 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 1.73 | |
| 10 | $ 1.41 | |||
| 25 | $ 1.30 | |||
| 50 | $ 1.19 | |||
| 100 | $ 1.08 | |||
| 250 | $ 1.04 | |||
| 500 | $ 1.00 | |||
| 1000 | $ 0.94 | |||
Description
General part information
MP5094 Series
The MP5094 is a protection device designed to protect circuitry on the output from transients on the input. The MP5094 also protects the input from undesired shorts and transients coming from the output. The MP5094 is a small RDS(ON), low quiescent current, dual-channel, current-limited switch. During start-up, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by a capacitor at the SS pin. The maximum load at the output is current-limited. The magnitude of the current limit is fixed internally. The output voltage is limited by an output over-voltage protection (OVP) function.
Documents
Technical documentation and resources