Specification	PGA113AIDGSR

-3db Bandwidth	10 MHz
Amplifier Type	Programmable Gain
Current - Input Bias	1.5 nA
Current - Output / Channel	60 mA
Current - Supply	330 µA
Mounting Type	Surface Mount
Number of Circuits	1
Operating Temperature [Max]	125 °C
Operating Temperature [Min]	-40 °C
Output Type	Rail-to-Rail
Package / Case	10-MSOP, 10-TFSOP
Package / Case [x]	3 mm
Package / Case [x]	0.118 in
Slew Rate	8 V/µs
Supplier Device Package	10-VSSOP
Voltage - Input Offset	75 µV
Voltage - Supply Span (Max) [Max]	5.5 V
Voltage - Supply Span (Min) [Min]	2.2 V

PGA113 Series

Zero-drift, 100-µV offset, 12-nV/√Hz noise, RRO (scope gain) programmable gain amp with 2-ch mux

Part	Amplifier Type	Number of Circuits	Supplier Device Package	Mounting Type	Current - Input Bias	Voltage - Supply Span (Min) [Min]	Slew Rate	Voltage - Supply Span (Max) [Max]	Operating Temperature [Max]	Operating Temperature [Min]	Output Type	Package / Case	Package / Case [x]	Package / Case [x]	Current - Supply	-3db Bandwidth	Voltage - Input Offset	Current - Output / Channel	Current - Supply (Main IC)	Supplied Contents	Voltage - Supply, Single/Dual (±) [Min]	Voltage - Supply, Single/Dual (±) [Max]	Board Type	Utilized IC / Part	Channels per IC
Texas Instruments PGA113AIDGSTG4	Programmable Gain	1	10-VSSOP	Surface Mount	1.5 nA	2.2 V	8 V/µs	5.5 V	125 °C	-40 °C	Rail-to-Rail	10-MSOP 10-TFSOP	3 mm	0.118 in	330 µA	10 MHz	75 µV	60 mA
Texas Instruments PGA113EVM-B	Programmable Gain						8 V/µs				Rail-to-Rail					10 MHz		60 mA	330 µA	Board(s) Cable(s)	2.2 V	5.5 V	Fully Populated	PGA113	1 - Single
Texas Instruments PGA113AIDGSR	Programmable Gain	1	10-VSSOP	Surface Mount	1.5 nA	2.2 V	8 V/µs	5.5 V	125 °C	-40 °C	Rail-to-Rail	10-MSOP 10-TFSOP	3 mm	0.118 in	330 µA	10 MHz	75 µV	60 mA
Texas Instruments PGA113AIDGST	Programmable Gain	1	10-VSSOP	Surface Mount	1.5 nA	2.2 V	8 V/µs	5.5 V	125 °C	-40 °C	Rail-to-Rail	10-MSOP 10-TFSOP	3 mm	0.118 in	330 µA	10 MHz	75 µV

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 3.84
		10	$ 2.53
		25	$ 2.18
		100	$ 1.80
		250	$ 1.61
		500	$ 1.50
		1000	$ 1.40
	Digi-Reel®	1	$ 3.84
		10	$ 2.53
		25	$ 2.18
		100	$ 1.80
		250	$ 1.61
		500	$ 1.50
		1000	$ 1.40
	Tape & Reel (TR)	2500	$ 1.30
		5000	$ 1.24
		7500	$ 1.21
Texas Instruments	LARGE T&R	1	$ 2.17
		100	$ 1.79
		250	$ 1.29
		1000	$ 0.97

Description

General part information

PGA113 Series

The PGA112 and PGA113 devices (binary and scope gains) offer two analog inputs, a three-pin SPI interface, and software shutdown in a 10-pin, VSSOP package. The PGA116 and PGA117 (binary and scope gains) offer 10 analog inputs, a SPI interface with daisy-chain capability, and hardware and software shutdown in a 20-pin TSSOP package.

All versions provide internal calibration channels for system-level calibration. The channels are tied to GND, 0.9 VCAL, 0.1 VCAL, and VREF, respectively. VCAL, an external voltage connected to Channel 0, is used as the system calibration reference. Binary gains are: 1, 2, 4, 8, 16, 32, 64, and 128; scope gains are: 1, 2, 5, 10, 20, 50, 100, and 200.

Documents

Technical documentation and resources

PGA11x Zerø-Drift Programmable Gain Amplifier With Mux datasheet (Rev. C)

Data sheet

PGA112/113EVM Users Guide (Rev. A)

EVM User's guide