DRV8313PWP
Active65-V MAX 3-A PEAK 3-PHASE MOTOR DRIVER WITH INTEGRATED FETS
Deep-Dive with AI
Search across all available documentation for this part.
DRV8313PWP
Active65-V MAX 3-A PEAK 3-PHASE MOTOR DRIVER WITH INTEGRATED FETS
Technical Specifications
Parameters and characteristics for this part
| Specification | DRV8313PWP |
|---|---|
| Applications | General Purpose |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Interface | Parallel |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Half Bridge (3) |
| Package / Case | 28-PowerTSSOP |
| Package / Case [custom] | 4.4 mm |
| Package / Case [custom] | 0.173 " |
| Supplier Device Package | 28-HTSSOP |
| Technology | Power MOSFET |
| Voltage - Load [Max] | 60 V |
| Voltage - Load [Min] | 8 V |
| Voltage - Supply [Max] | 60 V |
| Voltage - Supply [Min] | 8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 4.42 | |
| 10 | $ 3.99 | |||
| 50 | $ 3.81 | |||
| 100 | $ 3.31 | |||
| 250 | $ 3.27 | |||
| Texas Instruments | TUBE | 1 | $ 5.28 | |
| 100 | $ 4.63 | |||
| 250 | $ 3.25 | |||
| 1000 | $ 2.62 | |||
Description
General part information
DRV8313 Series
The DRV8313 provides three individually controllable half-H-bridge drivers. The device is intended to drive a three-phase brushless-DC motor, although it can also be used to drive solenoids or other loads. Each output driver channel consists of N-channel power MOSFETs configured in a 1/2-H-bridge configuration. Each 1/2-H-bridge driver has a dedicated ground terminal, which allows independent external current sensing.
An uncommitted comparator is integrated into the DRV8313, which allows for the construction of current-limit circuitry or other functions.
Internal protection functions are provided for undervoltage, charge pump faults, overcurrent, short circuits, and overtemperature. Fault conditions are indicated by the nFAULT pin.
Documents
Technical documentation and resources
