Specification	TLV2763IDGS

Amplifier Type	General Purpose
Current - Input Bias	3 pA
Current - Output / Channel	10.2 mA
Current - Supply	20 µA
Gain Bandwidth Product	500 kHz
Mounting Type	Surface Mount
Number of Circuits	2
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	Rail-to-Rail
Package / Case	10-MSOP, 10-TFSOP
Package / Case [x]	3 mm
Package / Case [x]	0.118 in
Slew Rate	0.23 V/µs
Supplier Device Package	10-VSSOP
Voltage - Input Offset	550 µV
Voltage - Supply Span (Max) [Max]	3.6 V
Voltage - Supply Span (Min) [Min]	1.8 V

TLV2763 Series

Dual, 3.6-V, 500-kHz, RRIO operational amplifier with shutdown

Part	Current - Output / Channel	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Input Offset	Package / Case	Package / Case [x]	Package / Case [x]	Supplier Device Package	Amplifier Type	Voltage - Supply Span (Min) [Min]	Current - Supply	Gain Bandwidth Product	Number of Circuits	Current - Input Bias	Slew Rate	Mounting Type	Voltage - Supply Span (Max) [Max]	Output Type
Texas Instruments TLV2763IDGS	10.2 mA	85 °C	-40 °C	550 µV	10-MSOP 10-TFSOP	3 mm	0.118 in	10-VSSOP	General Purpose	1.8 V	20 µA	500 kHz	2	3 pA	0.23 V/µs	Surface Mount	3.6 V	Rail-to-Rail

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 2.57
		10	$ 2.31
		80	$ 1.86
		320	$ 1.74
		560	$ 1.53
		1040	$ 1.26
		2560	$ 1.18
		5040	$ 1.13
Texas Instruments	TUBE	1	$ 2.85
		100	$ 1.93
		250	$ 1.49
		1000	$ 0.99

Description

General part information

TLV2763 Series

The TLV276x single supply operational amplifiers provide 500 kHz bandwidth from only 20 µA while operating down to 1.8 V over the industrial temperature range. The maximum recommended supply voltage is 3.6 V, which allows the devices to be operated from (.1.8 V supplies down to .0.9 V) two AA or AAA cells. The devices have been characterized at 1.8 V (end of life of 2 AA(A) cells) and at 2.4 V (nominal voltage of 2 NiCd/NiMH cells). The TLV276x have rail-to-rail input and output capability which is a necessity at 1.8 V.

The low supply current is coupled with extremely low input bias currents enabling them to be used with mega-ohm resistors. Low shutdown current of only 10 nA make these devices ideal for low frequency measurement applications desiring long active battery life.

All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package.

Documents

Technical documentation and resources

Family of 1.8-V MicroPower Rail-to-Rail Input/Output Op Amps with Shutdown datasheet (Rev. F)

Data sheet