
ADJH24005
ActivePOWER RELAY, SPST-NO, 5 VDC, 50 A, DJ-H (ADJH) SERIES, THROUGH HOLE, LATCHING DUAL COIL
Deep-Dive with AI
Search across all available documentation for this part.

ADJH24005
ActivePOWER RELAY, SPST-NO, 5 VDC, 50 A, DJ-H (ADJH) SERIES, THROUGH HOLE, LATCHING DUAL COIL
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | ADJH24005 |
|---|---|
| Approval Agency | cURus, VDE |
| Coil Current | 400 mA |
| Coil Insulation | Class F |
| Coil Resistance | 12.5 Ohms |
| Coil Type | Latching, Dual Coil |
| Coil Voltage | 5 VDC |
| Contact Form | SPST-NO (1 Form A) |
| Contact Material | Silver Tin Oxide (AgSnO) |
| Contact Rating (Current) | 50 A |
| Load - Max Switching | 24000 VA |
| Mounting Type | Through Hole |
| Must Operate Voltage | 3.75 VDC |
| Operate Time | 20 ms |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 C |
| Relay Type | General Purpose |
| Release Time | 20 ms |
| Seal Rating | Sealed - Flux Protection |
| Switching Voltage [Max] | 480 VAC |
| Termination Style | PC Pin |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
Description
General part information
ADJH24 Series
The ADJH24005 from Panasonic Electric Works is a DJ-H power relay (ADJH). It is suitable for lighting and motor load applications. This relay is also used in applications like smart house (shutter and blind control) and lighting control applications. It has minimum insulation resistance (initial) of 1000Mohm at 500VDC measured portion is the same as the case of dielectric voltage. This power relay has high inrush capability (tungsten load (TV-20 class), electronic ballast load (NEMA410), capacitive load (IEC60669-1)). Dielectric strength (initial) is 1500Vrms for 1min (detection current: 10mA) between open contacts and 4000Vrms for 1min (detection current: 10mA) between contact and coil. The surge withstand voltage (initial) between contact and coil is 12000V, set time is maximum 20ms (initial) (at 20°C, rated voltage without bounce and reset time is maximum 20ms (initial) at 20°C, rated voltage without bounce. Minimum mechanical life is 1×10^6 (at 180 times/min).
Documents
Technical documentation and resources