
MAX38913AATD+T
Active4ΜVRMSULTRA-LOW-NOISE 1A LDO WITH TWO-LEVEL OUTPUT-VOLTAGE SELECTION
Deep-Dive with AI
Search across all available documentation for this part.

MAX38913AATD+T
Active4ΜVRMSULTRA-LOW-NOISE 1A LDO WITH TWO-LEVEL OUTPUT-VOLTAGE SELECTION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | MAX38913AATD+T |
|---|---|
| Control Features | Soft Start, Enable, Current Limit |
| Current - Output | 1 A |
| Current - Quiescent (Iq) | 2 mA |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | 14-WFDFN Exposed Pad |
| Protection Features | Over Temperature, Under Voltage Lockout (UVLO), Short Circuit, Over Current |
| PSRR [Max] | 75 dB |
| PSRR [Min] | 50 dB |
| Supplier Device Package | 14-TDFN (3x3) |
| Voltage - Output (Max) [Max] | 5 V |
| Voltage - Output (Min/Fixed) | 0.6 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | N/A | 0 | $ 2.03 | |
| 7500 | $ 2.03 | |||
Description
General part information
MAX38913 Series
The MAX38913/MAX38914 is a low-noise linear regulator that delivers up to 1A of load current with as low as 4μVRMSof output noise. The MAX38913/MAX38914 can dynamically change its output voltage between two separate levels. The MAX38913/MAX38914 has the pass-through mode which, when enabled, completely bypasses the linear regulator.This regulator maintains ±1% output accuracy over a wide input voltage range, temperature, and load conditions. The no-load quiescent current in the regulation mode is 1.37mA. During the pass-through mode, unlike the conventional dropout mode of an LDO, the MAX38913/MAX38914 consumes very little quiescent current. The MAX38913/MAX38914 has a 6Ω active discharge feature to quickly discharge output capacitors of up to 300μF.The MAX38913 has 33 programmable output-voltage settings for both voltage selections. The MAX38914 has pre-programmed output voltage levels of 2.3V and 2V. The MAX38913/MAX38914 is packaged in either a space-saving 12-bump WLP or a full-featured 3mm x 3mm, 14-pin TDFN package. Optional power-OK and power-on-reset pins are available in the 14-pin TDFN version.ApplicationsImage SensorsPortable Sensor ApplicationsSD Memory Cards
Documents
Technical documentation and resources