TMUX7349FRTJR
Active±60V, FAULT-PROTECTED, DUAL 4:1 MULTIPLEXERS WITH FAULT THRESHOLD, LATCH-UP IMMUNITY AND 1.8-V LOGIC
Deep-Dive with AI
Search across all available documentation for this part.
TMUX7349FRTJR
Active±60V, FAULT-PROTECTED, DUAL 4:1 MULTIPLEXERS WITH FAULT THRESHOLD, LATCH-UP IMMUNITY AND 1.8-V LOGIC
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TMUX7349FRTJR |
|---|---|
| -3db Bandwidth | 255 MHz |
| Channel Capacitance (CS(off), CD(off)) [custom] | 4 pF |
| Channel Capacitance (CS(off), CD(off)) [custom] | 16 pF |
| Channel-to-Channel Matching (ΔRon) | 2.5 Ohm |
| Charge Injection | -16 pC |
| Crosstalk | -103 dB |
| Current - Leakage (IS(off)) (Max) | 1 nA |
| Mounting Type | Surface Mount |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) [Max] | 250 Ohm |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 20-WFQFN Exposed Pad |
| Supplier Device Package | 20-QFN (4x4) |
| Switch Circuit | SP4T - Open |
| Switch Time (Ton, Toff) (Max) [custom] | 450 ns |
| Switch Time (Ton, Toff) (Max) [custom] | 390 ns |
| Voltage - Supply, Single (V+) [Max] | 44 V |
| Voltage - Supply, Single (V+) [Min] | 8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tape & Reel (TR) | 3000 | $ 4.27 | |
| Texas Instruments | LARGE T&R | 1 | $ 4.14 | |
| 100 | $ 3.38 | |||
| 250 | $ 2.65 | |||
| 1000 | $ 2.25 | |||
Description
General part information
TMUX7349F Series
The TMUX7348F and TMUX7349F are modern complementary metal-oxide semiconductor (CMOS) analog multiplexers in 8:1 (single ended) and 4:1 (differential) configurations. The devices work well with dual supplies (±5 V to ±22 V), a single supply (8 V to 44 V), or asymmetric supplies (such as V DD = 12 V, V SS = –5 V). The overvoltage protection is available in powered and powered-off conditions, making the TMUX7348F and TMUX7349F devices suitable for applications where power supply sequencing cannot be precisely controlled.
The device blocks fault voltages up to +60 V and –60 V relative to ground in both powered and powered-off conditions. When no power supplies are present, the switch channels remain in the OFF state regardless of switch input conditions and logic control status. Under normal operation conditions, if the analog input signal level on any Sx pin exceeds positive fault supply (V FP) or negative fault supply (V FN) by a threshold voltage (V T), then the channel turns OFF and the Sx pin becomes high impedance. When the fault channel is selected, the drain pin (D or Dx) is pulled to the fault supply voltage (V FP or V FN) that was exceeded. The devices provide two active-low interrupt flags (FF and SF) to provide details of the fault. The FF flag indicates if any of the source inputs are experiencing a fault condition, while the SF flag is used to decode which specific inputs are experiencing a fault condition.
The low capacitance, low charge injection, and integrated fault protection enables the TMUX7348F and TMUX7349F devices to be used in front end data acquisition applications where high performance and high robustness are both critical. The devices are available in standard TSSOP package and smaller WQFN package (ideal if PCB space is limited).
Documents
Technical documentation and resources
