TLIN10283DDARQ1
ActiveAUTOMOTIVE LOCAL INTERCONNECT NETWORK (LIN) TRANSCEIVER WITH INTEGRATED VOLTAGE REGULATOR
Deep-Dive with AI
Search across all available documentation for this part.
TLIN10283DDARQ1
ActiveAUTOMOTIVE LOCAL INTERCONNECT NETWORK (LIN) TRANSCEIVER WITH INTEGRATED VOLTAGE REGULATOR
Technical Specifications
Parameters and characteristics for this part
| Specification | TLIN10283DDARQ1 |
|---|---|
| Data Rate | 100 Kbps |
| Duplex | Half |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-PowerSOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Protocol | LIN |
| Qualification | AEC-Q100 |
| Receiver Hysteresis | 500 mV |
| Supplier Device Package | 8-SO PowerPad |
| Type | Transceiver |
| Voltage - Supply [Max] | 28 V |
| Voltage - Supply [Min] | 5.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.70 | |
| 10 | $ 1.53 | |||
| 25 | $ 1.44 | |||
| 100 | $ 1.23 | |||
| 250 | $ 1.15 | |||
| 500 | $ 1.01 | |||
| 1000 | $ 0.83 | |||
| Digi-Reel® | 1 | $ 1.70 | ||
| 10 | $ 1.53 | |||
| 25 | $ 1.44 | |||
| 100 | $ 1.23 | |||
| 250 | $ 1.15 | |||
| 500 | $ 1.01 | |||
| 1000 | $ 0.83 | |||
| Tape & Reel (TR) | 2500 | $ 0.71 | ||
| Texas Instruments | LARGE T&R | 1 | $ 1.26 | |
| 100 | $ 0.97 | |||
| 250 | $ 0.72 | |||
| 1000 | $ 0.51 | |||
Description
General part information
TLIN1028S-Q1 Series
The TLIN1028S-Q1 is a local interconnect network (LIN) physical layer transceiver, compliant to LIN 2.2A ISO/DIS 17987–4 standards, with an integrated low dropout (LDO) voltage regulator.
LIN is a single-wire bidirectional bus typically used for low speed in-vehicle networks using data rates up to 20 kbps. The LIN receiver supports data rates up to 100 kbps for end-of-line programming. The TLIN1028S-Q1 converts the LIN protocol data stream on the TXD input into a LIN bus signal. The receiver converts the data stream to logic-level signals that are sent to the microprocessor through the open-drain RXD pin. The TLIN1028S-Q1 reduces system complexity by providing a 3.3 V or 5 V rail with up to 70 mA of current to power microprocessors, sensors or other devices. The TLIN1028S-Q1 has an optimized current-limited wave-shaping driver which reduces electromagnetic emissions (EME).
The TLIN1028S-Q1 is a local interconnect network (LIN) physical layer transceiver, compliant to LIN 2.2A ISO/DIS 17987–4 standards, with an integrated low dropout (LDO) voltage regulator.
