TPS2393PW
Active-20-V TO -80-V HOT SWAP CONTROLLER WITH D6INDUSTRIAL TEMPERATURE RANGE
Deep-Dive with AI
Search across all available documentation for this part.
TPS2393PW
Active-20-V TO -80-V HOT SWAP CONTROLLER WITH D6INDUSTRIAL TEMPERATURE RANGE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS2393PW |
|---|---|
| Applications | -48 V |
| Current - Supply | 1.05 mA |
| Features | Auto Retry |
| Internal Switch(s) | False |
| Mounting Type | Surface Mount |
| Number of Channels | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 14-TSSOP |
| Package / Case [custom] | 0.173 " |
| Package / Case [custom] | 4.4 mm |
| Programmable Features | UVLO, Slew Rate, Fault Timeout, Current Limit, OVP |
| Supplier Device Package | 14-TSSOP |
| Type | Hot Swap Controller |
| Voltage - Supply [Max] | -20 V |
| Voltage - Supply [Min] | -80 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 4.93 | |
| 10 | $ 4.43 | |||
| 90 | $ 3.63 | |||
| 270 | $ 3.44 | |||
| 540 | $ 3.09 | |||
| 1080 | $ 2.60 | |||
| 2520 | $ 2.47 | |||
| Texas Instruments | TUBE | 1 | $ 4.28 | |
| 100 | $ 3.75 | |||
| 250 | $ 2.63 | |||
| 1000 | $ 2.12 | |||
Description
General part information
TPS2393A Series
The TPS2392 and TPS2393 integrated circuits are hot swap power managers optimized for use in nominal –48-V systems. They operate with supply voltage ranges from –20-V to –80-V, and are rated to withstand spikes to –100 V. In conjunction with an external N-channel FET and sense resistor, they can be used to enable live insertion of plug-in cards and modules in powered systems. Each device provides load current slew rate control and peak magnitude limiting. Undervoltage and overvoltage shutdown thresholds are easily programmed via a three-resistor divider network. In addition, two active-low, debounced inputs provide plug-in insertion detection. A power good (PG)\ output enables downstream converters. The TPS2392 and TPS2393 also provide the basic hot swap functions of electrical isolation of faulty cards, filtered protection against nuisance overcurrent trips, and single-line fault reporting. The 44-pin part supports designs where telecomm creepage and clearance requirements must be followed.
The TPS2392 latches off in response to current faults, while the TPS2393 periodically retries the load in the event of a fault.
The TPS2392 and TPS2393 integrated circuits are hot swap power managers optimized for use in nominal –48-V systems. They operate with supply voltage ranges from –20-V to –80-V, and are rated to withstand spikes to –100 V. In conjunction with an external N-channel FET and sense resistor, they can be used to enable live insertion of plug-in cards and modules in powered systems. Each device provides load current slew rate control and peak magnitude limiting. Undervoltage and overvoltage shutdown thresholds are easily programmed via a three-resistor divider network. In addition, two active-low, debounced inputs provide plug-in insertion detection. A power good (PG)\ output enables downstream converters. The TPS2392 and TPS2393 also provide the basic hot swap functions of electrical isolation of faulty cards, filtered protection against nuisance overcurrent trips, and single-line fault reporting. The 44-pin part supports designs where telecomm creepage and clearance requirements must be followed.
Documents
Technical documentation and resources
