BQ25601DRTWR
ActiveI2C 1CELL 3A BUCK BATTERY CHARGER WITH POWER PATH, USB DETECTION AND OTG
Deep-Dive with AI
Search across all available documentation for this part.
BQ25601DRTWR
ActiveI2C 1CELL 3A BUCK BATTERY CHARGER WITH POWER PATH, USB DETECTION AND OTG
Technical Specifications
Parameters and characteristics for this part
| Specification | BQ25601DRTWR |
|---|---|
| Battery Chemistry | Lithium Ion/Polymer |
| Charge Current - Max [Max] | 3 A |
| Current - Charging | Constant - Programmable |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit, Over Current |
| Interface | I2C |
| Mounting Type | Surface Mount |
| Number of Cells | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 24-WFQFN Exposed Pad |
| Programmable Features | Current, Voltage |
| Supplier Device Package | 24-WQFN (4x4) |
| Voltage - Supply (Max) [Max] | 13.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.28 | |
| 10 | $ 2.95 | |||
| 25 | $ 2.79 | |||
| 100 | $ 2.42 | |||
| 250 | $ 2.29 | |||
| 500 | $ 2.06 | |||
| 1000 | $ 1.74 | |||
| Digi-Reel® | 1 | $ 3.28 | ||
| 10 | $ 2.95 | |||
| 25 | $ 2.79 | |||
| 100 | $ 2.42 | |||
| 250 | $ 2.29 | |||
| 500 | $ 2.06 | |||
| 1000 | $ 1.74 | |||
| Tape & Reel (TR) | 3000 | $ 1.53 | ||
| Texas Instruments | LARGE T&R | 1 | $ 2.16 | |
| 100 | $ 1.89 | |||
| 250 | $ 1.32 | |||
| 1000 | $ 1.07 | |||
Description
General part information
BQ25601D Series
The BQ25601D device is a highly-integrated 3-A switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer battery. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I2C serial interface with charging and system settings makes the device a truly flexible solution.
The BQ25601D is a highly-integrated 3.0-A switch-mode battery charge management and system power path management device for single cell Li-Ion and Li-polymer battery. It features fast charging with high input voltage support for a wide range of smart phones, tablets and portable devices. Its low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. Its input voltage and current regulation deliver maximum charging power to battery. The solution is highly integrated with input reverse-blocking FET (RBFET, Q1), high-side switching FET (HSFET, Q2), low-side switching FET (LSFET, Q3), and battery FET (BATFET, Q4) between system and battery. It also integrates the bootstrap diode for the high-side gate drive for simplified system design. The I2C serial interface with charging and system settings makes the device a truly flexible solution.
The device supports a wide range of input sources, including standard USB host port, USB charging port, and USB compliant high voltage adapter. The device sets default input current limit based on the built-in USB interface. To set the default input current limit, the device uses the built-in USB interface, or takes the result from detection circuit in the system, such as USB PHY device. The device is compliant with USB 2.0 and USB 3.0 power spec with input current and voltage regulation. The device also meets USB On-the-Go (OTG) operation power rating specification by supplying 5.15 V on VBUS with constant current limit up to 1.2A.
Documents
Technical documentation and resources
