MAX6711SEXS+T
ActiveMPU SUPERVISOR, 1V-5.5V SUPPLY, ACTIVE-LOW, PUSH-PULL RESET, 240 MS DELAY/2.93V THRESHOLD, SC-70-4
Deep-Dive with AI
Search across all available documentation for this part.
MAX6711SEXS+T
ActiveMPU SUPERVISOR, 1V-5.5V SUPPLY, ACTIVE-LOW, PUSH-PULL RESET, 240 MS DELAY/2.93V THRESHOLD, SC-70-4
Technical Specifications
Parameters and characteristics for this part
| Specification | MAX6711SEXS+T |
|---|---|
| Mounting Type | Surface Mount |
| Number of Voltages Monitored | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output | Push-Pull, Totem Pole |
| Package / Case | SC-82A, SOT-343 |
| Reset | Active Low |
| Reset Timeout [Min] | 140 ms |
| Supplier Device Package | SC-70-4 |
| Type | Simple Reset/Power-On Reset |
| Voltage - Threshold | 2.93 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 5.33 | |
| 10 | $ 3.56 | |||
| 25 | $ 3.11 | |||
| 100 | $ 2.59 | |||
| 250 | $ 2.35 | |||
| 500 | $ 2.19 | |||
| 1000 | $ 2.07 | |||
| Digi-Reel® | 1 | $ 5.33 | ||
| 10 | $ 3.56 | |||
| 25 | $ 3.11 | |||
| 100 | $ 2.59 | |||
| 250 | $ 2.35 | |||
| 500 | $ 2.19 | |||
| 1000 | $ 2.07 | |||
| N/A | 11340 | $ 4.74 | ||
| 30000 | $ 4.74 | |||
| Tape & Reel (TR) | 2500 | $ 2.01 | ||
| 5000 | $ 1.94 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 5.42 | |
| 10 | $ 3.67 | |||
| 25 | $ 3.19 | |||
| 50 | $ 3.01 | |||
| 100 | $ 2.82 | |||
| 250 | $ 2.63 | |||
| 500 | $ 2.42 | |||
Description
General part information
MAX6711 Series
The MAX6711/MAX6712/MAX6713 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when used with +5.0V, +3.3V, +3.0V, or +2.5V-powered circuits. They also provide a debounced manual reset input.These circuits assert a reset signal whenever the VCCsupply voltage declines below a preset threshold or whenever manual reset is asserted. Reset remains asserted for at least 140ms after VCChas risen above the reset threshold or when manual reset is deasserted. Reset thresholds suitable for operation with a variety of supply voltages are available.The MAX6713 has an open-drain output stage, while the MAX6711/MAX6712 have push-pull outputs. The MAX6713's open-drain active-low RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The MAX6711/MAX6713 have an active-low reset output, while the MAX6712 has an active-high reset output. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCCdown to 1V.Low supply current makes the MAX6711/MAX6712/MAX6713 ideal for use in portable equipment. These devices are available in a 4-pin SC70 package.ApplicationsComputers: Desktop, Workstation, ServerControllersCritical µP and µC Power MonitoringIntelligent InstrumentsPortable Battery-Powered Equipment
Documents
Technical documentation and resources
