Technical Specifications
Parameters and characteristics for this part
| Specification | TLE75080ESHXUMA1 |
|---|---|
| Current - Output (Max) [Max] | 330 mA |
| Fault Protection | Over Voltage, Open Load Detect, Over Temperature, Current Limiting (Fixed) |
| Features | Slew Rate Controlled |
| Grade | Automotive |
| Interface | SPI |
| Mounting Type | Surface Mount |
| Number of Outputs | 8 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 24-TSSOP (0.154", 3.90mm Width) Exposed Pad |
| Qualification | AEC-Q100 |
| Ratio - Input:Output | 1:8 |
| Rds On (Typ) | 1 Ohm |
| Supplier Device Package | PG-TSDSO-24-21 |
| Switch Type | Relay, Solenoid Driver |
| Voltage - Load [Max] | 28 V |
| Voltage - Load [Min] | 3 V |
| Voltage - Supply (Vcc/Vdd) [Max] | 5.5 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.80 | |
| 10 | $ 2.51 | |||
| 25 | $ 2.37 | |||
| 100 | $ 2.06 | |||
| 250 | $ 1.95 | |||
| 500 | $ 1.75 | |||
| 1000 | $ 1.48 | |||
| Digi-Reel® | 1 | $ 2.80 | ||
| 10 | $ 2.51 | |||
| 25 | $ 2.37 | |||
| 100 | $ 2.06 | |||
| 250 | $ 1.95 | |||
| 500 | $ 1.75 | |||
| 1000 | $ 1.48 | |||
| N/A | 10107 | $ 2.34 | ||
| Tape & Reel (TR) | 3000 | $ 1.40 | ||
| 6000 | $ 1.35 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 2.80 | |
| 10 | $ 2.08 | |||
| 25 | $ 1.90 | |||
| 50 | $ 1.81 | |||
| 100 | $ 1.71 | |||
| 250 | $ 1.61 | |||
| 500 | $ 1.56 | |||
| 1000 | $ 1.52 | |||
Description
General part information
TLE75080 Series
It is specially designed to control relays and LEDs in automotive and industrial applications. A serial peripheral interface (SPI) is utilized for control and diagnosis of the loads as well as of the device. For direct control and PWM there are two input pins available connected to two outputs by default. Additional or different outputs can be controlled by the same input pins (programmable via SPI).
Documents
Technical documentation and resources
