TCAN1046ADRQ1
ActiveCAN 8MBPS NORMAL/STANDBY 5V 14-PIN SOIC T/R AUTOMOTIVE AEC-Q100
Deep-Dive with AI
Search across all available documentation for this part.
TCAN1046ADRQ1
ActiveCAN 8MBPS NORMAL/STANDBY 5V 14-PIN SOIC T/R AUTOMOTIVE AEC-Q100
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TCAN1046ADRQ1 |
|---|---|
| Data Rate | 8 Mbps |
| Duplex | Half |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Number of Drivers/Receivers [custom] | 2 |
| Number of Drivers/Receivers [custom] | 2 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 14-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Protocol | CANbus |
| Qualification | AEC-Q100 |
| Receiver Hysteresis | 115 mV |
| Type | Transceiver |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.79 | |
| 10 | $ 1.63 | |||
| 25 | $ 1.59 | |||
| 50 | $ 1.58 | |||
| 100 | $ 1.41 | |||
| 250 | $ 1.41 | |||
| 500 | $ 1.39 | |||
| 1000 | $ 1.33 | |||
| Digi-Reel® | 1 | $ 1.79 | ||
| 10 | $ 1.63 | |||
| 25 | $ 1.59 | |||
| 50 | $ 1.58 | |||
| 100 | $ 1.41 | |||
| 250 | $ 1.41 | |||
| 500 | $ 1.39 | |||
| 1000 | $ 1.33 | |||
| Tape & Reel (TR) | 2500 | $ 1.28 | ||
| 5000 | $ 1.23 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.76 | |
| 100 | $ 1.45 | |||
| 250 | $ 1.04 | |||
| 1000 | $ 0.79 | |||
Description
General part information
TCAN1046A-Q1 Series
The TCAN1046A-Q1 is a dual high-speed controller area network (CAN) transceiver that meets the physical layer requirements of the ISO 11898-2:2016 high-speed CAN specification.
The device supports both classical CAN and CAN FD networks up to 8 megabits per second (Mbps). The device has two CAN FD channels with independent supply, VCC1and VCC2, and mode control, STB1 and STB2 pins, allowing for true independent operation of each CAN channel. The ability to operate each channel independent of one another is important in applications that require redundancy or additional CAN FD channels to act as a back-up in the event of a system failure.
The device includes many protection and diagnostic features including thermal-shutdown (TSD), TXD-dominant time-out (DTO), and bus fault protection up to ±58 V. The device has defined failsafe behavior in supply under-voltage or floating pin scenarios.
Documents
Technical documentation and resources