
IR2085STRPBF
NRNDEICEDRIVER™ 100 V HALF BRIDGE DRIVER IC WITH TYPICAL 1 A SOURCE AND 1 A SINK OUTPUT CURRENTS. IT COMES WITH A FUNCTIONAL LEVELSHIFT SOIC 8N PACKAGE AND WORKS WITH IGBTS AND MOSFETS.
Deep-Dive with AI
Search across all available documentation for this part.
Technical Specifications
Parameters and characteristics for this part
| Specification | IR2085STRPBF |
|---|---|
| Channel Type | Independent |
| Current - Peak Output (Source, Sink) | 1 A, 1 A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET, MOSFET (N-Channel) |
| Grade | Automotive |
| High Side Voltage - Max (Bootstrap) [Max] | 100 V |
| Input Type | RC Input Circuit |
| Mounting Type | Surface Mount |
| Number of Drivers | 2 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 0.154 in |
| Package / Case | 8-SOIC |
| Package / Case | 3.9 mm |
| Qualification | AEC-Q100 |
| Rise / Fall Time (Typ) [custom] | 20 ns |
| Rise / Fall Time (Typ) [custom] | 40 ns |
| Supplier Device Package | 8-SOIC |
| Voltage - Supply [Max] | 15 V |
| Voltage - Supply [Min] | 10 VDC |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 4.10 | |
| 10 | $ 3.68 | |||
| 25 | $ 3.48 | |||
| 100 | $ 3.01 | |||
| 250 | $ 2.86 | |||
| 500 | $ 2.57 | |||
| 1000 | $ 2.16 | |||
| Digi-Reel® | 1 | $ 4.10 | ||
| 10 | $ 3.68 | |||
| 25 | $ 3.48 | |||
| 100 | $ 3.01 | |||
| 250 | $ 2.86 | |||
| 500 | $ 2.57 | |||
| 1000 | $ 2.16 | |||
| N/A | 0 | $ 0.00 | ||
| Tape & Reel (TR) | 2500 | $ 2.06 | ||
| 5000 | $ 1.98 | |||
Description
General part information
IR2085 Series
The IR2085S is a self-oscillating half-bridge driver IC with 50% duty cycle ideally suited for 36V – 75V halfbridge DC-bus converters. This product is also suitable for push-pull converters without restriction on input voltage. Each channel frequency is equal to fOSC, which can be set by selecting RT & CT, where fOSC = 1/(2*RT.CT). Dead-time can be controlled through proper selection of CT and can range from 50ns to 200ns. Internal soft-start increases the pulse width during power up and maintains pulse width matching for the high and low outputs throughout the start up cycle. The IR2085S initiates a soft start at power up and after every overcurrent condition. Undervoltage lockout prevents operation if VCC is less than 7.5V.
Documents
Technical documentation and resources