SN74LV245ADWR
ActiveOCTAL BUS TRANSCEIVERS WITH TRI-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74LV245ADWR
ActiveOCTAL BUS TRANSCEIVERS WITH TRI-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74LV245ADWR |
|---|---|
| Current - Output High, Low [custom] | 16 mA |
| Current - Output High, Low [custom] | 16 mA |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 8 |
| Number of Elements | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 20-SOIC |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Supplier Device Package | 20-SOIC |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 2 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.83 | |
| 10 | $ 0.73 | |||
| 25 | $ 0.69 | |||
| 100 | $ 0.56 | |||
| 250 | $ 0.52 | |||
| 500 | $ 0.45 | |||
| 1000 | $ 0.36 | |||
| Digi-Reel® | 1 | $ 0.83 | ||
| 10 | $ 0.73 | |||
| 25 | $ 0.69 | |||
| 100 | $ 0.56 | |||
| 250 | $ 0.52 | |||
| 500 | $ 0.45 | |||
| 1000 | $ 0.36 | |||
| Tape & Reel (TR) | 2000 | $ 0.26 | ||
| 4000 | $ 0.24 | |||
| 6000 | $ 0.23 | |||
| 10000 | $ 0.22 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.56 | |
| 100 | $ 0.38 | |||
| 250 | $ 0.29 | |||
| 1000 | $ 0.20 | |||
Description
General part information
SN74LV245AT Series
This octal bus transceiver is designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.
The SN74LV245AT allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down,OEshould be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Documents
Technical documentation and resources
