Specification	DRV2605LYZFR

Applications	Haptic Feedback
Function	Driver - Fully Integrated, Control and Power Stage
Interface	I2C
Motor Type - AC, DC	ERM, LRA
Mounting Type	Surface Mount
Operating Temperature [Max]	150 °C
Operating Temperature [Min]	-40 °C
Output Configuration	Half Bridge (2)
Package / Case	DSBGA, 9-UFBGA
Supplier Device Package	9-DSBGA
Technology	Power MOSFET
Voltage - Load [Max]	5.5 V
Voltage - Load [Min]	2 V
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	2 V

DRV2605L-Q1 Series

Automotive Haptic driver for ERM/LRA with 2-V operation, waveform library & auto-resonance tracking

Part	Operating Temperature [Max]	Operating Temperature [Min]	Supplier Device Package	Interface	Applications	Mounting Type	Package / Case	Package / Case [x]	Package / Case [x]	Grade	Qualification	Motor Type - AC, DC	Technology	Function	Voltage - Load [Min]	Voltage - Load [Max]	Output Configuration	Voltage - Supply [Min]	Voltage - Supply [Max]	Contents	Supplied Contents	Utilized IC / Part	Embedded	Type	Secondary Attributes
Texas Instruments DRV2605LTDGSRQ1	150 °C	-40 °C	10-VSSOP	I2C	Haptic Feedback	Surface Mount	10-MSOP 10-TFSOP	3 mm	0.118 in	Automotive	AEC-Q100	ERM LRA	Power MOSFET	Driver - Fully Integrated Control and Power Stage	2 V	5.2 V	Half Bridge (2)	2 V	5.2 V
Texas Instruments DRV2605YZFR	150 °C	-40 °C	9-DSBGA	I2C	Haptic Feedback	Surface Mount	9-UFBGA DSBGA					ERM LRA	Power MOSFET	Driver - Fully Integrated Control and Power Stage	2.5 V	5.5 V	Half Bridge (2)	2.5 V	5.5 V
Texas Instruments DRV2605LEVM-CT														Motor Controller/Driver Haptic/Vibration						Board(s) Cable(s)	Board(s) Cable(s)	DRV2605L	16-Bit MCU	Power Management	On-Board LEDs
Texas Instruments DRV2605EVM-BT														Motor Controller/Driver Haptic/Vibration							Board(s)	DRV2605	16-Bit MCU	Power Management	On-Board LEDs
Texas Instruments DRV2605EVM-CT														Motor Controller/Driver Haptic/Vibration						Board(s) Cable(s)	Board(s) Cable(s)	DRV2605	16-Bit MCU	Power Management	On-Board LEDs
Texas Instruments DRV2605YZFT	150 °C	-40 °C	9-DSBGA	I2C	Haptic Feedback	Surface Mount	9-UFBGA DSBGA					ERM LRA	Power MOSFET	Driver - Fully Integrated Control and Power Stage	2.5 V	5.5 V	Half Bridge (2)	2.5 V	5.5 V
Texas Instruments DRV2605LDGSR	150 °C	-40 °C	10-VSSOP	I2C	Haptic Feedback	Surface Mount	10-MSOP 10-TFSOP	3 mm	0.118 in			ERM LRA	Power MOSFET	Driver - Fully Integrated Control and Power Stage	2 V	5.5 V	Half Bridge (2)	2 V	5.5 V
Texas Instruments DRV2605LDGSEVM-M														Motor Controller/Driver Haptic/Vibration							Board(s)	DRV2605L		Power Management	On-Board LEDs
Texas Instruments DRV2605LDGST	150 °C	-40 °C	10-VSSOP	I2C	Haptic Feedback	Surface Mount	10-MSOP 10-TFSOP	3 mm	0.118 in			ERM LRA	Power MOSFET	Driver - Fully Integrated Control and Power Stage	2 V	5.5 V	Half Bridge (2)	2 V	5.5 V
Texas Instruments DRV2605LYZFR	150 °C	-40 °C	9-DSBGA	I2C	Haptic Feedback	Surface Mount	9-UFBGA DSBGA					ERM LRA	Power MOSFET	Driver - Fully Integrated Control and Power Stage	2 V	5.5 V	Half Bridge (2)	2 V	5.5 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.37
		10	$ 2.13
		25	$ 2.01
		100	$ 1.71
		250	$ 1.61
		500	$ 1.41
		1000	$ 1.16
	Digi-Reel®	1	$ 2.37
		10	$ 2.13
		25	$ 2.01
		100	$ 1.71
		250	$ 1.61
		500	$ 1.41
		1000	$ 1.16
	Tape & Reel (TR)	3000	$ 1.08
		6000	$ 1.04
Texas Instruments	LARGE T&R	1	$ 1.27
		100	$ 1.05
		250	$ 0.75
		1000	$ 0.57

Description

General part information

DRV2605L-Q1 Series

The DRV2605L device is a low-voltage haptic driver that includes a haptic-effect library and provides a closed-loop actuator-control system for high-quality tactile feedback for ERM and LRA. This schema helps improve actuator performance in terms of acceleration consistency, start time, and brake time and is accessible through a shared I2C compatible bus or PWM input signal.

The DRV2605L device offers a licensed version of TouchSense 2200 software from Immersion which eliminates the requirement to design haptic waveforms because the software includes over 100 licensed effects (6 ERM libraries and 1 LRA library) and audio-to-vibe features.

Additionally, the real-time playback mode allows the host processor to bypass the library playback engine and play waveforms directly from the host through I2C.